Intel SR1520MLNA User Guide - Page 42
Installing the PCI Riser Assembly
![]() |
UPC - 735858197434
View all Intel SR1520MLNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
A B Figure 15. Removing PCI Riser Assembly AF002512 7. If you need to replace the PCI riser card, see "Removing and Installing the PCI Riser Card" on page 24. 8. If you need to install or remove a PCI add-in card, see "Installing and Removing a PCI Add-in Card" on page 26. 9. If you removed the PCI riser assembly as instructed in another procedure, continue with that procedure. Installing the PCI Riser Assembly Note: For clarity, the figure in this series of instructions does not show an attached add-in card. If you are installing an add-in card, do so before installing the PCI riser assembly into your server system. 1. Lower the riser assembly into place over the add-in card slot. See letter "A" in the following figure, aligning the tabs on the riser assembly with the matching slot at the back of the server system, and aligning the riser card with the slot in the server board. 2. Press down uniformly until the riser card is seated on the server board. 3. Insert the screw into the riser assembly bracket. See letter "B" in the figure. 22 Intel® Server System SR1520ML User's Guide
![](/manual_guide/products/intel-sr1520ml-user-guide-634c1a7/42.png)