Intel WX58BP Product Guide - Page 26

Intel® Workstation Board WX58BP Product Guide Installation Precautions When you install and test the Intel® Workstation Board WX58BP, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of:  Sharp pins on connectors  Sharp pins on printed circuit assemblies  Rough edges and sharp corners on the chassis  Hot components (such as processors, voltage regulators, and heatsinks)  Damage to wires that could cause a short circuit Observe all warnings and cautions that instruct you to refer computer servicing to qualified technical personnel. Prevent Power Supply Overload Do not overload the power supply output. To avoid overloading the power supply, make sure the calculated total current loads of all the modules within the computer is less than the output current rating of each of the power supply's output circuits. Observe Safety and Regulatory Requirements Read and follow the instructions in this section and the instructions supplied with the chassis and associated modules. If you do not follow these instructions and the instructions provided by the chassis and module suppliers, you increase your safety risk and the possibility of non-compliance with regional laws and regulations. If the instructions for the chassis are inconsistent with these instructions or the instructions for associated modules, contact the supplier to find out how you can ensure your computer meets safety and regulatory requirements. For information about the Intel® Workstation Board WX59BP's regulatory compliance, refer to Appendix B. 26