Intel WX58BP Product Guide - Page 46
USB 2.0 Headers, Front Panel Header
UPC - 735858208864
View all Intel WX58BP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Intel® Workstation Board WX58BP Product Guide USB 2.0 Headers Figure 23, G shows the location of the USB 2.0 headers. Table 8 shows the pin assignments and signal names for each USB 2.0 header. Each USB header can be used to connect two USB devices. Table 8. USB 2.0 Header Signal Names USB Port A Pin Signal Name 1 Power (+5 V) 3 D- 5 D+ 7 Ground 9 Key Note: USB ports may be assigned as needed. USB Port B Pin Signal Name 2 Power (+5 V) 4 D- 6 D+ 8 Ground 10 No Connection NOTE Computer systems that have an unshielded cable attached to a USB port might not meet FCC Class B requirements, even if no device or a low-speed USB device is attached to the cable. Use a shielded cable that meets the requirements for a full-speed USB device. Front Panel Header Figure 23, I shows the location of the front panel header. Table 9 shows the pin assignments and signal names for the front panel header. Table 9. Front Panel Header Signal Names Pin Description In/Out Pin Description Hard Drive Activity LED Power LED 1 Hard disk LED pull-up to +5 V Out 2 Front panel green LED 3 Hard disk active LED Out 4 Front panel yellow LED Reset Switch On/Off Switch 5 Ground 6 Power switch 7 Reset switch In 8 Ground Power Not Connected 9 Power Out 10 No pin In/Out Out Out In 46