Invacare IN66AHANFR Owners Manual - Page 28
Removing/Installing the Back Upholstery
View all Invacare IN66AHANFR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
SECTION 6-SEAT AND BACK 7. Remove seat cushion. DETAIL "A" Loop Strip HooK Strip DETAIL "B" HooK Strip Loop Strip Backing Seat Upholstery DETAIL "C" Adhesive Seat Upholstery DETAIL "D" Seat Upholstery Seat Cushion FIGURE 6.2 Removing/Installing the Seat Cushion Removing/Installing the Back Upholstery Removing NOTE: For this procedure, refer to FIGURE 6.3 on page 29. 1. Remove the two mounting screws and washers that secure the back upholstery to the back canes. 2. Remove the two height adjustment knobs that secure back cane to the wheelchair frame. 3. Pull the back canes out of the wheelchair frame. 4. Pull the back upholstery down and off the back canes. Installing 1. Install back upholstery onto the back canes. 2. Install back canes into wheelchair frame. 3. Secure the back canes to the wheelchair frame with the two adjustment knobs. Tighten securely. 4. Secure the back upholstery to the back canes with the two mounting screws and washers. Tighten securely. Insignia™ 28 Part No. 1163197