Invacare IN66AHANFR Owners Manual - Page 47

IV/O2 Holder SECTION 11-OPTIONS DETAIL "A" DETAIL "B" Upper Cylinder Bracket O2 Cylinder Lower Cylinder Bracket IV/O2 Holder NOTE: IV/O2 holder shown is not installed on the wheelchair for clarity. FIGURE 11.6 Using the IV/O2 Holder Upper Cylinder Bracket Locking Knob O2 Cylinder Adjusting the Height of the IV Pole NOTE: For this procedure, refer to FIGURE 11.7. 1. Loosen the height adjustment knob on the IV/O2 holder. 2. Adjust the IV pole to the desired height. 3. Retighten the height adjustment knob to secure the IV pole in place. Height Adjustment Knob IV Pole IV/O2 Holder FIGURE 11.7 Adjusting the Height of the IV Pole Cleaning the IV/O2 Holder ƽ WARNING The user and O2 cylinder MUST be removed from the wheelchair when cleaning the O2 holder. Otherwise, injury or damage may occur if cleaning agents come in contact with the O2 regulator. 1. Remove the user, any I.V. medication and the O2 cylinder from the wheelchair. 2. The telescoping I.V. pole/O2 holders clean easily with any household glass type cleaner. 3. After the cleaning solution has dried, it is safe for the user to re‐occupy the wheelchair. Part No. 1163197 47 Insignia™