Invacare IN66AHANFR Owners Manual - Page 40
Anti-tippers, Insignia, Caster, Seat-to-floor Height, Anti-tipper, Length/height
View all Invacare IN66AHANFR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
SECTION 10-ANTI-TIPPERS Adjusting Anti-Tippers NOTE: For this procedure, refer to FIGURE 10.3. 1. Press the release buttons on the wheeled portion of the anti‐tipper and slide it up or down to achieve the 1‐1/2 to 2‐inch clearance (Detail "A"). 2. Check to make sure that the release buttons are fully engaged in adjustment holes. DETAIL "A" Release Buttons 1½ inches 2 inches Anti-Tipper Height DETAIL "B" Anti-Tipper Length FIGURE 10.3 Adjusting Anti-Tippers NOTE: Refer to Detail "B" in FIGURE 10.3 and to the following chart to ensure the correct anti‐tipper is installed in the wheelchair. Seat‐to‐Floor heights are approximate depending on front caster size and type. Anti‐Tipper length measurement is taken with the extension tube in the longest position available.The anti‐tipper height measurement MUST be taken with the anti‐tipper on a flat surface. INSIGNIA CASTER SEAT-TO-FLOOR HEIGHT ANTI-TIPPER SIZE LENGTH/HEIGHT 6-inch and 16½, 17½, 18½, 19½ inches 8 inch 13.5/3.8-inches Insignia™ 40 Part No. 1163197