Invacare IN66AHANFR Owners Manual - Page 44

SECTION 11-OPTIONS Using the O2 Holder ƽ WARNING Only use O2 cylinders that are at least 10.7 inches in height and 4 3/8 inches in diameter. Smaller O2 cylinders will not secure in place properly which may result in injury and/or damage to the cylinder. NOTE: For this procedure, refer to FIGURE 11.3. 1. Place the O2 cylinder in the O2 holder as shown (Detail "A"). 2. Secure the O2 cylinder in place by rotating the locking knob clockwise (Detail "B"). Hand tighten only. DETAIL "A" O2 Holder DETAIL "B" O2 Cylinder Locking Knob O2 Cylinder O2 Holder NOTE: O2 holder shown is not installed on the wheelchair for clarity. FIGURE 11.3 Using the O2 Holder Cleaning the O2 Holder ƽ WARNING The user and O2 cylinder MUST be removed from the wheelchair when cleaning the O2 holder. Otherwise, injury or damage may occur if cleaning agents come in contact with the O2 regulator. 1. Remove the user and the O2 cylinder from the wheelchair. 2. The O2 holder cleans easily with any household glass type cleaner. NOTE: After the cleaning solution has dried, it is safe for the user to re‐occupy the wheelchair. Insignia™ 44 Part No. 1163197