Invacare TDXSP2V Owners Manual 2 - Page 23
Adjusting Remote Width, 4.3 Adjusting the Quad Link Remote Support
View all Invacare TDXSP2V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4.2.1 Adjusting Remote Width 4.3.1 Adjusting Remote Height 4 Setup 1. Loosen the screws A. 2. Adjust remote B to desired width. 3. Re-tighten the screws. 4.3 Adjusting the Quad Link Remote Support 1. Loosen the two set screws A on the remote mount. 2. Push or pull the remote mounting tube up or down to the desired height. 3. Tighten the two set screws on the remote mount. 4.3.2 Adjusting Remote Position Perform this procedure to adjust the position of the remote on the Quad Link. 60101876-C 23
4.2.1 Adjusting Remote Width
1. Loosen the screws
A
.
2. Adjust remote
B
to desired width.
3. Re-tighten the screws.
4.3 Adjusting the Quad Link Remote Support
4.3.1 Adjusting Remote Height
1.
Loosen the two set screws
A
on the remote mount.
2.
Push or pull the remote mounting tube up or down to the
desired height.
3.
Tighten the two set screws on the remote mount.
4.3.2 Adjusting Remote Position
Perform this procedure to adjust the position of the remote on
the Quad Link.
60101876-C
23
4 Setup