Invacare TDXSP2V Owners Manual 2 - Page 62

Six Month Inspection, System Service Manual.

Get Invacare TDXSP2V PDF manuals and user guides View all Invacare TDXSP2V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Invacare® Captain's Seat WARNING! Risk of Serious Injury or Damage Hardware that is loosely secured could cause loss of stability resulting in serious injury or damage. -After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely. The following are recommended items to inspect during regular service inspections performed by a qualified technician. Actual items to be inspected during the service inspection may vary according to the specific wheelchair. 9.2.1 Six Month Inspection Ensure arm pivot points are not worn and/or loose. Replace if necessary. Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary. Ensure seat release latch is functional. Ensure seat is secured to wheelchair frame. Ensure adjustable height arms operate and lock securely. Ensure arms are secure but easy to release and adjustment levers engage properly. 62 Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary. Check center mount front riggings for loose fasteners. Replace /tighten if necessary. Torque to 166 in-lbs (14 ftlbs, 18 Nm). Cables shall be inspected periodically to ensure that they are routed and secured properly. Periodic inspection is recommended as it may reveal loose and/or damaged cables. Re-secure all loose cables and replace by following the recommendations outlined in the LiNX Controls System Service Manual. Ensure proper operation of powered functions (drive, seating, legrests, etc.). Inspect electrical components for signs of corrosion. Replace if corroded or damaged. Clean upholstery and armrests. Check that all labels are present and legible. Replace if necessary. Ensure clothing guards are secure. Ensure upholstery does not have any rips or tears. Ensure armrest pad sits flush against arm tube. 60101876-C

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
WARNING!
Risk of Serious Injury or Damage
Hardware that is loosely secured could cause loss of
stability resulting in serious injury or damage.
-After ANY adjustments, repair or service and before
use, make sure that all attaching hardware is
tightened securely.
The following are recommended items to inspect during
regular service inspections performed by a qualified technician.
Actual items to be inspected during the service inspection may
vary according to the specific wheelchair.
9.2.1 Six Month Inspection
Ensure arm pivot points are not worn and/or loose.
Replace if necessary.
Ensure seat and/or back upholstery have no rips and do
not sag. Replace if necessary.
Ensure seat release latch is functional.
Ensure seat is secured to wheelchair frame.
Ensure adjustable height arms operate and lock securely.
Ensure arms are secure but easy to release and
adjustment levers engage properly.
Inspect seat positioning strap for any signs of wear. Ensure
buckle latches. Verify hardware that attaches strap to
frame is secure and undamaged. Replace if necessary.
Check center mount front riggings for loose fasteners.
Replace /tighten if necessary. Torque to 166 in-lbs (14 ft-
lbs, 18 Nm).
Cables shall be inspected periodically to ensure that they
are routed and secured properly. Periodic inspection is
recommended as it may reveal loose and/or damaged
cables. Re-secure all loose cables and replace by following
the recommendations outlined in the LiNX Controls
System Service Manual.
Ensure proper operation of powered functions (drive,
seating, legrests, etc.).
Inspect electrical components for signs of corrosion.
Replace if corroded or damaged.
Clean upholstery and armrests.
Check that all labels are present and legible.
Replace if necessary.
Ensure clothing guards are secure.
Ensure upholstery does not have any rips or tears.
Ensure armrest pad sits flush against arm tube.
62
60101876-C
Invacare® Captain's Seat