Invacare TDXSP2V Owners Manual 2 - Page 29

Adjusting the Footplate Angle, 4.4.6 Adjusting the Tension of the Flip Up Footplate

Get Invacare TDXSP2V PDF manuals and user guides View all Invacare TDXSP2V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Fig. 4-4 Medium Wide (Three Spacers) Fig. 4-5 Wide (Four Spacers) 4.4.5 Adjusting the Footplate Angle 4.4.6 Adjusting the Tension of the Flip Up Footplate 4 Setup Manual Center Mount Footrest is shown for reference B. Rear view of footplate I is shown for clarity. 1. Flip footplate up. 2. Rotate the adjustment screw P in or out until the desired angle is achieved. 3. Repeat STEPS 1 and 2 for the other footplate. The tension can be adjusted to increase or decrease the rotation effort of the flip up footplates I. 1. Loosen the mounting screw J on the front rigging angle hinge to decrease the rotation effort. DO NOT remove the footplate mounting screw. 2. Tighten the front rigging angle hinge mounting screw to increase the rotation effort. 3. Repeat STEPS 1 and 2 for the other footplate. 60101876-C 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Fig. 4-4 Medium Wide (Three Spacers)
Fig. 4-5 Wide (Four Spacers)
4.4.5 Adjusting the Footplate Angle
Manual Center Mount Footrest is shown for
reference
B
.
Rear view of footplate
I
is shown for clarity.
1. Flip footplate up.
2. Rotate the adjustment screw
P
in or out until the desired
angle is achieved.
3.
Repeat STEPS 1 and 2 for the other footplate.
4.4.6 Adjusting the Tension of the Flip Up Footplate
The tension can be adjusted to increase or decrease
the rotation effort of the flip up footplates
I
.
1. Loosen the mounting screw
J
on the front rigging angle
hinge to decrease the rotation effort.
DO NOT remove the footplate mounting screw.
2.
Tighten the front rigging angle hinge mounting screw to
increase the rotation effort.
3.
Repeat STEPS 1 and 2 for the other footplate.
60101876-C
29
4 Setup