Invacare TDXSP2V Owners Manual 2 - Page 64

Adjusting/Replacing Telescoping Front Rigging Supports, support tubes, ensure that

Get Invacare TDXSP2V PDF manuals and user guides View all Invacare TDXSP2V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Invacare® Captain's Seat 9.5 Adjusting/Replacing Telescoping Front Rigging Supports When adjusting the telescoping front rigging support depth, ensure the footplate does not interfere with the caster wheel rotation. Telescoping front rigging supports may be extended up to 2-inches from the wheelchair frame in 1-inch increments. This adjustment does not affect seat depth. 1. Remove the two socket bolts A, spacers B, and locknuts C that secure telescoping front rigging support D to the seat frame E. 2. Perform one of the following: l Adjusting - Align the appropriate mounting hole F of the telescoping front rigging support with the front mounting hole G in the seat frame tubes to achieve the desired depth as shown in the illustration. l Replacing - Perform the following steps: A. Remove the existing telescoping front rigging support from the wheelchair frame. When installing the front riggings support tubes, ensure that the sector blocks H are on the outside of the wheelchair facing away from the seat frame. B. Insert the new telescoping front rigging support into the seat frame. C. Align the appropriate mounting hole of the telescoping front rigging support with the front mounting hole in the seat frame tubes to achieve the desired depth as shown in the illustration. The footplate will be on the inside of the wheelchair when locked in place. 3. Using the two socket bolts and locknuts, secure the 64 60101876-C

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
9.5 Adjusting/Replacing Telescoping Front
Rigging Supports
When adjusting the telescoping front rigging support
depth, ensure the footplate does not interfere with the
caster wheel rotation.
Telescoping front rigging supports may be
extended up to 2-inches from the wheelchair
frame in 1-inch increments. This adjustment
does not affect seat depth.
1.
Remove the two socket bolts
A
, spacers
B
, and locknuts
C
that secure telescoping front rigging support
D
to the
seat frame
E
.
2.
Perform one of the following:
l
Adjusting - Align the appropriate mounting hole
F
of
the telescoping front rigging support with the front
mounting hole
G
in the seat frame tubes to achieve
the desired depth as shown in the illustration.
l
Replacing - Perform the following steps:
A.
Remove the existing telescoping front rigging
support from the wheelchair frame.
When installing the front riggings
support tubes, ensure that the
sector blocks
H
are on the
outside of the wheelchair facing
away from the seat frame.
B.
Insert the new telescoping front rigging support
into the seat frame.
C.
Align the appropriate mounting hole of the
telescoping front rigging support with the front
mounting hole in the seat frame tubes to achieve
the desired depth as shown in the illustration.
The footplate will be on the inside of the
wheelchair when locked in place.
3.
Using the two socket bolts and locknuts, secure the
64
60101876-C
Invacare® Captain's Seat