Invacare TDXSP2V Owners Manual 2 - Page 31

and ME24 ONLY., secured properly to ensure that the tubing does

Get Invacare TDXSP2V PDF manuals and user guides View all Invacare TDXSP2V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

-The oxygen holder is designed to be used in conjunction with oxygen cylinder models MD15 and ME24 ONLY. -To maintain safety, use ONLY Invacare oxygen cylinder accessories (i.e. regulator, oxygen demand devices). -DO NOT use the oxygen holder for anything other than the intended purpose of supporting an oxygen cylinder-otherwise, injury or damage may occur. -The installation of the oxygen holder onto the back of the wheelchair seat significantly increases the length of the wheelchair. When turning the wheelchair it is important to take note of this increased length- otherwise injury or damage may occur. -When using nasal or masked type administering equipment, oxygen or air tubing MUST be routed and secured properly to ensure that the tubing does NOT become entangled, kinked or severed. 5 Accessories 1. Place the oxygen cylinder into the oxygen holder A. 2. Ensure the oxygen cylinder is seated properly in the holder. 3. Route the oxygen tubing so it does not become entangled, kinked or severed. 60101876-C 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
-The oxygen holder is designed to be used in
conjunction with oxygen cylinder models MD15
and ME24 ONLY.
-To maintain safety, use ONLY Invacare oxygen
cylinder accessories (i.e. regulator, oxygen
demand devices).
-DO NOT use the oxygen holder for anything other
than the intended purpose of supporting an oxygen
cylinder—otherwise, injury or damage may occur.
-The installation of the oxygen holder onto the back of
the wheelchair seat significantly increases the length
of the wheelchair. When turning the wheelchair it is
important to take note of this increased length—
otherwise injury or damage may occur.
-When using nasal or masked type administering
equipment, oxygen or air tubing MUST be routed and
secured properly to ensure that the tubing does NOT
become entangled, kinked or severed.
1.
Place the oxygen cylinder into the oxygen holder
A
.
2. Ensure the oxygen cylinder is seated properly in
the holder.
3.
Route the oxygen tubing so it does not become entangled,
kinked or severed.
60101876-C
31
5 Accessories