Invacare TDXSP2V Owners Manual 2 - Page 26
Removing/Installing the Manual Center Mount Footrest
![]() |
View all Invacare TDXSP2V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Invacare® Captain's Seat Risk of Serious Injury or Damage Operating the wheelchair with a clearance of less than 75 mm (3 inches) between the footplates and the ground/floor may cause serious injury or property damage. -ALWAYS maintain a minimum of 75 mm (3 inches) between the bottom of the footplates and ground/floor to ensure proper clearance while the wheelchair is in motion. If necessary, adjust the footplates height to achieve proper clearance. After footplates height adjustment, if the wheelchair dips forward and the footplates touch the ground while in motion, please contact your provider for an inspection and avoid use of the wheelchair if possible. Risk of Injury Pinch points can cause injury. A pinch point Q exists between the center mount footrest and casters. There is limited clearance between center mount footrest and casters. -The user's feet MUST remain on the center mount footrest while operating the wheelchair. If the user's feet are allowed to rest off the side of the center mount footrest they may come in contact with the caster possibly resulting in injury. 26 Fig. 4-1 Pinch Points-Center Mount Footrest The manual center mount footrests have the following features: l Adjustable knee angle l Adjustable height l Flip up footplates (adjustable width and angle) or footboard 4.4.1 Removing/Installing the Manual Center Mount Footrest Release lever is not shown. It is located towards the front or center of seat frame. 60101876-C
![](/manual_guide/products/invacare-ifx20c-owners-manual-012cb4f/26.png)