JVC DVL120U Instruction Manual - Page 13

MENU/BRIGHT Wheel Power Lamp Lock Button Power Switch Display REC MODE - SP LP Menu Screen Sub Menu EN 13 Recording Mode Setting Set the tape recording mode depending on your preference. 1 Set the Power Switch to " " while pressing down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on. 2 Press the MENU/BRIGHT wheel in. The Menu Screen appears. 3 Rotate the MENU/BRIGHT wheel to select " CAMERA" and press it. The CAMERA Menu appears. 4 Rotate the MENU/BRIGHT wheel to select "REC MODE" and press it. The Sub Menu appears. Select "SP" or "LP" by rotating the MENU/BRIGHT wheel and press it. Rotate the MENU/BRIGHT wheel to select " RETURN", and press it twice. The Menu Screen closes. • Audio Dubbing (੬ pg. 43) and Insert Editing (੬ pg. 44) are possible on tapes recorded in the SP mode. • "LP" (Long Play) is more economical, providing 1.5 times the recording time. NOTES: ● If the recording mode is switched during recording, the playback picture will be blurred at the switching point. ● It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder. ● During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.