JVC DVL120U Instruction Manual - Page 24

24 EN NOTES: ● During Night-Scope, the following functions or settings cannot be activated and its indicator blinks or goes out: • Some modes of "Programme AE With Special Effects" (੬ pg. 24, 25). • "GAIN UP" in the CAMERA Menu (੬ pg. 33). • "DIS" in the MANUAL Menu (੬ pg.33). ● During Night-Scope, it may be difficult to bring the camcorder into focus. To prevent this, use of manual focus and/or a tripod is recommended. MENU/BRIGHT Wheel FOR RECORDING Night-Scope Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed. 1 Set the Power Switch to " " while pressing down the Lock Button located on the switch. 2 Press NIGHT SCOPE so that the Night-Scope indicator " "appears. • The shutter speed is automatically adjusted to provide up to 30 times sensitivity. • "A" appears beside " " while the shutter speed is being automatically adjusted. To Deactivate Night-Scope press NIGHT SCOPE again so that the Night- Scope indicator disappears. Lock Button Power Switch NIGHT SCOPE Button Display ᮡ SNOW SPOT L I GHT TW I L I GHT SEP I A MONOTONE CLASS I C F I LM S T ROBE SLOW 4X OFF ᮢ Programme AE With Special Effects 1 Set the Power Switch to " " while pressing down the Lock Button located on the switch. 2 Press the MENU/BRIGHT wheel in. The Menu Screen appears. 3 Rotate the MENU/BRIGHT wheel to select " PROGRAM AE", then press it. 4 Rotate the MENU/BRIGHT wheel to select the desired mode (੬ pg. 25), then press it. Selection is complete. Press the MENU/BRIGHT wheel in again. The Menu Screen closes. • The PROGRAM AE Menu disappears and the selected mode is activated. The selected mode indicator appears. To Deactivate The Selected Mode select "OFF" in step 4. NOTES: ● Programme AE with special effects can be changed during recording or during Record-Standby. ● Some modes of Programme AE special effects cannot be used during Night-Scope. IMPORTANT Some modes of Programme AE with special effects cannot be used with certain Fade/Wipe Effects (੬ pg. 26, 27). If an unusable mode is selected, its indicator blinks or goes out.