JVC DVL120U Instruction Manual - Page 19
Playback
UPC - 046838160868
View all JVC DVL120U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
PLAYBACK Play/Pause Button (4/6) Rewind Button (2) Stop Button (5) Power Zoom Lever (VOL.) Fast-Forward Button (3) Speaker EN 19 Normal Playback 1 Load a tape (੬ pg. 12). 2 Set the Power Switch to "PLAY" while pressing down the Lock Button located on the switch. To start playback, press 4/6. • To stop playback, press 5. • Press 2 to rewind, or 3 to fast-forward the tape during Stop mode. To Control The Speaker Volume slide the Power Zoom Lever (VOL.) towards "+" to turn up the volume, or towards "-" to turn down the volume. NOTES: ● If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to "OFF", then to "PLAY". ● The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (੬ pg. 20). ● You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body. ● LCD monitor/viewfinder indications: • When power is supplied from a battery: the " " battery pack remaining power indicator is displayed. When power is supplied from an AC outlet: " " does not appear. • During Stop mode, none of the indications are displayed. ● When a cable is connected to the AV connector, the sound is not heard from the speaker. Still Playback: Pauses during playback. 1) Press 4/6 during playback. 2) To resume normal playback, press 4/6 again. ● If still playback continues for more than about 3 minutes, the camcorder's Stop mode is automatically engaged. After 5 minutes in the Stop mode, the camcorder's power is automatically turned off. ● When 4/6 is pressed, the image may not pause immediately while the camcorder stabilises the still image. Shuttle Search: Allows high-speed search in either direction. 1) Press 3 for forward or 2 for reverse search during playback. 2) To resume normal playback, press 4/6. ● During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes. ● A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction. Frame-By-Frame Playback: Allows frame-by-frame search. 1) Engage Still Playback. 2) Rotate the MENU/BRIGHT wheel towards "+" for forward Frame-By-Frame Playback, or towards "-" for reverse Frame-By-Frame Playback during Still Playback. ● To resume normal playback, press 4/6. ATTENTION During Shuttle Search, parts of the picture may not be clearly visible, particularly on the left side of the screen.