JVC DVL120U Instruction Manual - Page 38

38 EN Power Switch Connector cover* To AV To S-VIDEO Audio/Video cable [mini-plug to RCA plug] (provided) S-Video cable (optional) White to AUDIO L IN To S-VIDEO IN Yellow to VIDEO** IN Red to AUDIO R IN VCR TV DUBBING Dubbing To A VCR 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 20 and 21. 2 Set the camcorder's Power Switch to "PLAY" while pressing down the Lock Button located on the switch, turn on the VCR's power, and insert the appropriate cassettes in the camcorder and the VCR. 3 Engage the VCR's AUX and Record-Pause modes. 4 Engage the camcorder's Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6 on the camcorder. 5 Press 4/6 on the camcorder and engage the VCR's Record mode. 6 Engage the VCR's Record-Pause mode and press 4/6 on the camcorder. 7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished. NOTES: ● As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes. ● Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape. To choose whether or not the following displays appear on the connected TV . . . • Date/Time ..... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the Menu Screen (੬ pg. 36). • Time Code ..... set "TIME CODE" to "ON" or "OFF" in the Menu Screen (੬ pg. 36). • Playback Sound Mode, Tape Speed And Tape Running Displays ..... set "ON SCREEN" to "LCD" or "LCD/TV" in the Menu Screen (੬ pg. 36). * When connecting the cables, open this cover. ** Connect when an S-Video cable is not used.