JVC DVL120U Instruction Manual - Page 37

EN 37 Playback Sound During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on pg. 36, select "SOUND MODE" or "12BIT MODE" from the Menu Screen and set it to the desired parameter. STEREO Sound is output on both "L" and "R" channels in stereo. SOUND MODE SOUND L SOUND R Sound from the "L" channel is output. Sound from the "R" channel is output. 12BIT MODE MIX SOUND 1 SOUND 2 Original and dubbed sounds are combined and output in stereo on both "L" and "R" channels. Original sound is output on both "L" and "R" channels in stereo. Dubbed sound is output on both "L" and "R" channels in stereo. : Factory-preset NOTES: ● The "SOUND MODE" setting is available for both 12-bit and 16-bit sound. (In previous models' functions, "12-bit" is called "32 kHz" and "16-bit" is called "48 kHz".) ● The camcorder cannot detect the sound mode in which the recording was made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner. Display ON SCREEN setting: For playback sound, tape speed and tape running. 12B I T / SOUND1 L SP 4 6 DATE/TIME setting: For date/time. TIME CODE setting: For time code. 25 . 12 . 02 17 :30 12 : 34 : 24 Frames* Seconds Minutes *25 frames = 1 second