JVC DVL120U Instruction Manual - Page 45
SYSTEM CONNECTIONS, Connection To A Personal Computer
UPC - 046838160868
View all JVC DVL120U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
SYSTEM CONNECTIONS To DV IN/OUT Core filter DV cable (optional) PL AY OFF Power Switch Core filter To DV connector PC with DV connector EN 45 Connection To A Personal Computer This camcorder can transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software. 1 Make sure the camcorder and PC are turned off. 2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration. 3 Turn the camcorder's Power Switch to "PLAY" while pressing down the Lock Button located on the switch and turn on the PC. • Refer to the instruction manual of the software on how to transfer a still image to the PC. 4 When finished, turn off the PC first, then the camcorder. NOTES: ● It is recommended to use the AC Adapter as the power supply instead of the battery pack (੬ pg. 9). ● The date/time information cannot be captured into the PC. ● Refer to the instruction manuals of the PC and Software. ● The still images can also be transferred to a PC with a DV connector-equipped capture board. ● When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board. ● The system may not work properly depending on the PC or capture board you are using.