JVC GY-DV300REM Instruction Manual - Page 16

CONTROLS, Indications on LCD Screen and INDICATORS AND CONNECTORS Viewfinder Screen (Cont'd) VOL. Ⅵ Event Indications When the gain and shutter speed are changed manually, the set condition is displayed for about 3 seconds at the time the change is made. P L AY DV y ui o !0 (U MODEL) No. Item 6 VTR mode indication 7 DV signal indication (U MODEL) 8 Audio sampling frequency indication 9 Audio level meters display 0 Date and time indication Contents Indicates status of VTR operation. (STOP, PLAY, FF, REW, EJECT, STBY, FWD, REV, BSRH) DV : Displayed when IEEE1394 signal is recorded from the DV connector. The audio sampling frequency by which the recording was made is displayed during playback. (32K, 48K, 44.1K) The playback audio level meters are displayed during playback. These are not shown when the AUDIO LEVEL item is set to OFF on the DISPLAY [2/2] menu screen. Recorded data is show during playback, fast forward and rewind operations. During recording, the data from the DV connector is shown. The current data is shown in the stop mode. The indication is enabled/disabled by selecting the TIME/DATE item on the DISPLAY [2/2] menu screen. The display style is selected by setting the DISP STYLE item. When the date and time are not set, the indication will be as follows Event display area Event display area Set Condition Contents of Indication When the gain value is changed GAIN -3 dB to 18 dB (1 step) When the LOLUX gain mode is selected LOLUX When the shutter speed is changed SHUTTER 1/100, 1/250. 1/500, 1/1000, 1/2000 (U MODEL) 1/120, 1/250. 1/500, 1/1000, 1/2000 (E MODEL) When the variable shutter speed is changed V.SHUTTER 1/60.1 - 1/2084.6 (U MODEL) 1/50.1 - 1/2067.8 (E MODEL) When the shutter is NORMAL (shutter speed: 1/60) SHUTTER NORMAL TENTATIVE 28 29