JVC GY-DV300REM Instruction Manual - Page 52

CLOCK/TC Menu Screen Item TC PRESET CLOCK ADJUST DATE STYLE TIME STYLE SEC DISPLAY PAGE BACK Set Value YY/MM/DD ● MM/DD/YY DD/MM/YY ● 24 HOUR 12 HOUR ● ON OFF Contents The screen for setting the time code appears when the SELECT dial is pressed. ( See page 45.) The screen for setting the date and time appears when the SELECT dial is pressed. ( See page 41.) For selecting the style of the date display. YY/MM/DD: Year/Month/Date display style. MM/DD/YY: Month/Date/Year display style. DD/MM/YY: Date/Month/Year display style. For selecting the style of the time display. 24 HOUR : Displays the time using the 24-hour system. 12 HOUR : Displays the time using the 12-hour system. For selecting whether to include the seconds in the time display. ON : Seconds are displayed. OFF : Seconds are not displayed. The TOP MENU returns when the SELECT dial is pressed. VTR Menu Screen The VTR menu screen can only be set in the VTR playback mode. Item PB AUDIO SELECT Set Value ● CH1/2 MIX CH3/4 Contents Used to select which channels to reproduce when playing back a tape with sound recorded on 4 channels. CH1/2 : To reproduce the sound recorded on CH-1 and CH-2. The GY-DV300 records audio on the CH-1 and CH-2 channels during shooting. MIX : To simultaneously reproduce the sound of all four channels. CH3/4 : To reproduce the sound of the CH-3 and CH-4 channels. Memo: The GY-DV300 does not allow after-recording on the CH-3 and CH-4 channels. REM FF/REW ● FF/REW MODE SEARCH PAGE BACK DRUM HOUR This selects the operation when the FF or REW command is received when the GY-DV300 is controlled by the Non-liner editing controller FF/REW : Fast forward or rewind operation. Normally, use this setting. SEARCH: FWD search or REV search operation. Use this setting if Cue up operation is not performed correctly when this item is set to FF/REW. The TOP MENU (VTR) returns when the SELECT dial is pressed. Indicates the accumulated hours of drum running time. The cursor (f) cannot be aligned with this item. 99 TENTATIVE TROUBLESHOOTING Alarm Indications and Actions The GY-DV300 displays messages in the case of improper operation, notices on remaining battery power and tape and warnings in the case of abnormalities during VTR operation on the LCD screen and in the viewfinder. The TALLY lamp also blinks when the remaining battery power or tape becomes low. TALLY lamp Indication Screen HEAD CLEANING REQUIRED! A Ⅲ Indications on the LCD screen/Viewfinder screen ● Improper operation and notices Indication Condition Remedy CLOSE CASSETTE COVER! The cassette cover is open. Close the cassette cover. The GY-DV300 does not operate when the cassette cover is open. NO TAPE Displayed when no videocassette is Insert a videocassette. loaded. REC INHIBIT Displayed when an unrecordable Set the switch on the back of the cassette videocassette (the switch on the back of is set to "REC". the cassette is set to "SAVE") is loaded. 1394 INHIBIT (U MODEL) Displayed if an attempt to record is made when no DV signal is input. Input the DV signal. COPY INHIBIT Displayed when attempt to record a A copy-guard protected signal cannot be copy-guard protected signal is made. recorded. LOW VOLTAGE Displayed when remaining battery power becomes low. Prepare a charged battery or replace the battery immediately. TAPE NEAR END TAPE END The remaining tape is 3 minutes or less. To continue the recording, prepare a new (Only displayed in the shooting mode.) tape or replace with a new tape immediately. Displayed when the tape has run out. TAPE BEGIN Displayed when the tape is at begining position CASSETTE Displayed when the cassette cover was COVER OPEND! opened during recording. CASS.CARRIAGE Displayed when the cassette cover is Lock the cassette holder correctly. UNLOCK closed but the cassette holder is not locked. 100