JVC GY-DV300REM Instruction Manual - Page 9
Rear
View all JVC GY-DV300REM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
CONTROLS, INDICATORS AND CONNECTORS Rear Section !8 @0 !9 POWER OFF ON MODE CAM-B CAM-A VTR GAIN SHUTTER PUSH BAR AW MENU FWD REV CH-1 AUDIO CH-2 MIC1 MIC2 MONITOR CH-1 CH-2 MIX @1 @2 @3 @4 !3 !5 !7 !4 !6 C [POWER] POWER switch Turn the power ON and OFF with this switch. button during a recording engages the recording-pause (standby) mode. D Battery holder (U MODEL) Mount the provided battery pack BN-V428 here. ( See page 34.) D Battery holder (E MODEL) Mount the optional battery pack BN-V416 or BNV428 here. ( See page 34.) The BN-V416 battery pack cannot be used when the optional Network Pack KA-DV300 is used. E Battery lock release button Press this button to remove the battery pack. F [DC INPUT] DC connector Power input connector for 7 V DC. Accepts the optional AC adapter AA-P30. The power range is 6 V to 12 V. G REC Start/Stop button This button starts and stops recording. When the GY-DV300 is in the shooting mode, pressing this button starts the recording. Pressing the H [MODE] Mode selector switch Set in accordance with the operating mode of the GY-DV300. When used in the shooting mode, the switch is set to "CAM-A" or "CAM-B". When used in the VTR playback mode, it is set to "VTR". When set to "CAM-A" or "CAM-B" in the shooting mode, two separate sets of setting values for recording can be set by means of the menu screens. "CAM-A" : In this position, shooting takes place in accordance with the conditions set for "CAM-A" on the menu screen. "CAM-B" : In this position, shooting takes place in accordance with the conditions set for "CAM-B" on the menu screen. "VTR" : Set to this position when performing VTR playback. Also set to this position to record the video signal input from the DV 14 TENTATIVE connector. I [GAIN] Sensitivity selector button This button is for manual adjustment of sensitivity. It works when the AE item is set to OFF on the OPERATION menu screen. ● When the AE (Auto Exposure) function is OFF and this button is pressed, the condition of the current gain setting is shown on the LCD screen or the viewfinder screen for about 3 seconds. In this condition, it possible to set the gain setting of the GY-DV300. Gain is set by rotating the SELECT dial L. Rotating the dial upward moves gain in the plus direction, and rotating it downward moves it in the minus direction. When rotation of the dial stops, the set gain is indicated for about 3 seconds. [The variable range is -3 dB to +18 dB (1 dB step)] ● Pressing the button for 1 second or more engages the LOLUX mode. J [SHUTTER] Shutter speed selector button This button is for manual adjustment of the shutter speed. ● It works when the AE item on the OPERATION menu screen is set to OFF. Using the SHUTTER item on the OPERATION menu screen, select the shutter speed mode as STEP or VARIABLE. Set to VARIABLE when shooting computer display screens. ● When the button is pressed in MANUAL mode, the current shutter speed setting is shown on the LCD screen or the viewfinder screen for about 3 seconds. In this condition, it possible to set the shutter speed of the GY-DV300. The shutter speed is set by rotating the SELECT dial L. When rotation of the dial stops, the set shutter speed is indicated for about 3 seconds. [Variable range (U MODEL) STEP: 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000 VARIABLE: 1/60.1 to 1/2084.6] [Variable range (E MODEL) STEP: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000 VARIABLE: 1/50.1 to 1/2067.8] K [MENU] Menu button Press this button for 1 second or more to display the MENU setting screen. The MENU setting screen is shown on the LCD screen and the viewfinder screen. When the OUTPUT CHAR. item on the DISPLAY [2/2] menu screen is set to MIX, the MENU setting screen can also be output for display via the VIDEO OUT or Y/C OUT connector. Selections and settings in the menu are performed with the SELECT dial L. The normal screen returns when this button is pressed while the MENU setting screen is displayed. L SELECT dial ● When gain and shutter adjustment is set to the MANUAL mode, this dial is rotated to set the gain or shutter speed. ● When the white balance adjustment is set to the MANUAL mode, the white balance setting mode can be selected by rotating this dial. [Variable range: PRESET, MEMORY 1, 2, 3] ● When the MENU setting screen is displayed, this dial is used to select and set items in the menu. To confirm menu items and set values, press the dial. M [CH-1/CH-2 AUDIO] CH-1/CH-2 audio input selector switch Used to select the audio source input to the CH1/CH-2 channel. Separate inputs can be selected for the CH-1/CH-2 channels. MIC 1 : The sound from the built-in microphone or from the MIC 1 input connector is input. Select the input from the built-in microphone or from the MIC 1 input connector with the MIC1 INPUT SEL item on the SYSTEM [1/2] menu screen. MIC 2 : The sound from the MIC 2 input connector is input. N [MONITOR] Audio monitor selector switch Selects the monitor sound heard from the EARPHONE jack X or the built-in speaker. CH-1 : CH-1 audio signal CH-2 : CH-2 audio signal MIX : Mixed signal consisting of the CH-1 and CH-2 audio signals. 15