JVC LX-UH1B Operation Manual - Page 25
SYSTEM SETUP: Basic menu, High Altitude, Language, Background, Color, Splash Screen, Auto Power Off
View all JVC LX-UH1B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Submenu High Altitude Mode Functions and Descriptions The mode is for operation in areas like high altitude or high temperature environments. Activate the function when your environment is between 1500 m-3000 m above sea level and ambient temperature is between 0°C-30°C. Operation under High Altitude Mode may cause a higher decibel operating noise level because of increased fan speed necessary to improve overall system cooling and performance. If you use this projector under other extreme conditions excluding the above, it may display auto shut-down symptoms, which is designed to protect your projector from over-heating. In cases like this, you should switch to High Altitude Mode to solve these symptoms. However, this is not to state that this projector can operate under any and all harsh or extreme conditions. SYSTEM SETUP: Basic menu Submenu Functions and Descriptions Language Sets the language for the On-Screen Display (OSD) menus. Background Color Sets the background color for the projector. Splash Screen Allows you to select which logo screen displays during projector start-up. You can choose JVC logo screen, Blue screen, or Black screen. Auto Power Off Prevents unnecessary projection when no signal is detected for a long time. See "Setting Auto Power Off" for details. Direct Power On Allows the projector to turn on automatically once the power is fed through the power cord. • Menu Position Sets the OSD menu position. Menu Settings • Menu Display Time Sets the length of time the OSD will remain active after your last key press. • Reminder Message Sets the reminder messages on or off. Rename Input Auto Input Search Renames the current input source to your desired name. use / / / and OK to set the desired characters for the connected source item. Sets whether the projector searches automatically for input sources. Select On to enable the projector to scan for input sources until it acquires a signal. If the function is set to Off, the projector will select the last used input source. Menu Functions 25