JVC LX-UH1B Operation Manual - Page 31
Lamp information, Getting to know the lamp hour, Extending lamp life
View all JVC LX-UH1B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. To obtain the lamp hour information: 1. Press MENU. 2. Use the arrow keys ( / / / ) to go to INFORMATION or enter the INSTALLATION > Lamp Settings > Lamp Information menu. 3. The Lamp Usage Time information displays. 4. Press MENU to exit. Extending lamp life The projection lamp is a consumable item. To keep the lamp life as long as possible, you can do the following settings via the OSD menu. To access the OSD menu, see "Using the OSD menu" for details. Setting Lamp Mode Setting the projector in Eco mode extends the lamp life. 1. Go to INSTALLATION > Lamp Settings > Lamp Mode. 2. Press / to move to your desired mode, and press OK. 3. When done, press MENU to save your changes and exit. Setting Auto Power Off This function allows the projector to turn off automatically if no input source is detected after a set period of time. 1. Go to SYSTEM SETUP: Basic > Auto Power Off. 2. Press / to select a time period. If the preset time lengths are not suitable for your presentation, select Disable, and the projector will not automatically shut down in a certain time period. 3. When done, press MENU to save your changes and exit. Maintenance 31