Kenmore 75121 Owners Manual - Page 6
Installation, How To Install
View all Kenmore 75121 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
INSTALLATION Pick a location which will allow you to blow the cold air into the area you want. Windows used for installation must be strong enough to support the weight of the air conditioner. Good installation with special attention to the proper position of the unit will lessen the chance that service will be needed. When cooling more than one room, installation location is very important. To cool your rooms, cold air must be blown from the air conditioner in a straight path. HOW TO INSTALL If the air conditioner is blocked by a storm window frame, see step 19 on page 8 before beginning to install. H Remove the screws which fasten the cabinet at both sides and at the back. Save side screws. Discard back screws. Upperguide ITEM E Lower guide ITEM E FIG. 6 I_Open the window. Mark a line on center of the window inner sill. Carefully place the cabinet on the window inner sill and align the center of cabinet front with the center line marked in the window inner sill. FIG. 3 by gripping b_aseSplidaen thhaendulneit aonudt opfultlhfeorcwaabridnewt hile bracing tthhee cabinet. Window sill FIG. 7 r,_ Pull the bottom window sash down behind the upper guide until they meet. NOTE: Do not pull the window sash down so tightly that the movement of side curtain is restricted. Windowsash Upperguide FIG. 4 I_1 Cut the FOAM SEAL (ITEM I) to fit the underside of the window sash. Peel off the backing and attach the FOAM SEAL as shown in Fig. 5. Cab::Lu_urtnd FIG. 8 W Loosely assemble the sill supports using the parts in FIG. 9. FIG. 5 D Insert the side curtain (ITEM A) into the upper guide and lower guide of the air conditioner. Fasten the curtains to the unit with screws (ITEM E). ,.ooo xo _'_""_ ITEMC -6- ITEMDITEMB FIG. 9