Kenwood C-707I User Manual - Page 40
Press the [CD
View all Kenwood C-707I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
CD/USB 40 C-707I 2 Use the number keys or the [G] and [H] keys to select the track or file you want to listen to. Program number Track number Track 10 selected as program track 1 3 Press the [ENTER] key. z If you enter the wrong track or file in a program, press the [ENTER] key and then the [CLEAR] key. Return to step 2 and repeat the procedure. 4 If you want to select more tracks, repeat steps 2 and 3. z You can select up to 32 tracks for playback. If you attempt to select more tracks, the message "PGM FULL" appears on the display. 5 Press the [CDE] key or the [USBE] key to begin playback. "PGM" appears on the display. To cancel program mode Stop playback and then press the [CLEAR] key. This erases the current program. To remove a track from a program z Stop playback and then press the [P.MODE] key. z Next, each press of the [CLEAR] key will sequentially delete the last track of the program. Use the [] keys to select a program number. When the number of the track you want to delete is displayed, press the [CLEAR] key. To add a track to the end of the program Stop playback if it is in progress. Next, perform steps 1 through 5 of the above procedure. Checking the contents of the program Stop playback and then press the [G] or [H] key. z Turning off the system, ejecting the CD, or disconnecting the USB device erases the current program.