Kenwood DDX372BT User Manual - Page 55
Connection - parking off
View all Kenwood DDX372BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
CONNECTION/INSTALLATION Connection ❏ Connecting wires to terminals See page 57.*1 10 A fuse USB terminal (0.8 m): See page 56. See page 56. *1 Only for DDX672BH/DDX492/DDX415BT/DDX392/DDX372BT/ DDX320BT. *2 Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/ DDX272. Connect SiriusXM Connect Vehicle Tuner (commercially Connect the antenna cord to the antenna terminal. *3 Only for DDX415BT/DDX315. *4 If no connections are made, do not let the cable come out from the tab. available). See page 56.*2 Purple with white stripe Connect to the vehicle's reverse lamp harness when using the optional rear view camera. See page 56.*3 (Reverse sensor wire) 1 Light green (Parking sensor wire) Connect to the vehicle's parking 3 brake detection switch harness. White ª / White with black stripe · : To front speaker (left) • For best safety, be sure to connect Gray ª / Gray with black stripe · : To front speaker (right) the parking sensor. Green ª / Green with black stripe · : To rear speaker (left) Purple ª / Purple with black stripe · : To rear speaker (right) Blue (Antenna control wire) *4 Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. (Max. 300 mA, 12 V) Blue with white stripe (Power control wire) When using the optional power amplifier, connect to its power control terminal. Brown (Mute control wire) Not used. Light blue with yellow stripe (Steering remote control wire) Orange with white stripe (Dimmer control wire) To use the steering wheel remote control feature, an exclusive remote adapter (not supplied) matching your car is required. To car light control switch Ignition key switch Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) To car chassis Fuse box Battery ENGLISH 55