Kenwood DDX775BH America - Page 65
Wiring connection
View all Kenwood DDX775BH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Installation and Connection Wiring connection For DDX795/DDX775BH/DDX6018BT/DMX6018BT/DDX5018BT/DDX595/DDX575BT *1 *2 « *2 STEERING REMOTE [ Gray/Red ST REMOTE GND Bright green/Red Input 1 Purple/Red Input 2 Connect to your vehicle's steering remote harness. Contact your KENWOOD dealer for details. Connect the antenna cord to the antenna terminal. *1 *2 USB input terminal (1 m) Purple with white stripe REVERSE To the car's reverse lamp harness when using the optional rear view camera ¥ 10 A fuse Light green White ] / White with black stripe [ Gray ] / Gray with black stripe [ Green ] / Green with black stripe [ Purple ] / Purple with black stripe [ Brown Orange with white stripe Light blue with yellow stripe PRK SW To front speakers (left) Extension wire ( ø ) To the car's parking brake detection switch harness (For best safety, be sure to connect the parking sensor.) To front speakers (right) To rear speakers (left) To rear speakers (right) MUTE ILLUMI STEERING WHEEL REMOTE INPUT REMOTE CONT Not used. To the car light control switch *1 Only for DDX795/DDX775BH/DDX595/DDX575BT. *2 Only for DDX6018BT/DMX6018BT/DDX5018BT. To the OE remote adapter (not supplied) which is compatible with your car Blue with white stripe (12 V 350 mA) Red (Ignition wire) ANT.CONT P.CONT To the power control terminal when using the optional power amplifier (Or) To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna Yellow (Battery wire) Black (Ground wire) Ignition key switch To the car chassis Car fuse Car battery ENGLISH 63