Kenwood DDX775BH America - Page 75

Troubleshooting Specifications Bluetooth Phone sound quality is poor. → Reduce the distance between the unit and the Bluetooth mobile phone. → Move the car to a place where you can get a better signal reception. The sound is interrupted or skipped while using a Bluetooth audio player. → Reduce the distance between the unit and the Bluetooth audio player. Disconnect the device connected for Bluetooth phone. → Turn off, then turn on the unit. (When the sound is not yet restored) connect the player again. The connected audio player cannot be controlled. → Check whether the connected audio player supports AVRCP (Audio/Video Remote Control Profile). The Bluetooth device does not detect the unit. → Search from the Bluetooth device again. The unit does not pair with the Bluetooth device. → For devices compatible with Bluetooth 2.1: Register the device using a PIN code. (Page 40) → For devices compatible with Bluetooth 2.0: Enter the same PIN code for both the unit and target device. If the PIN code of the device is not indicated in its instructions, try "0000" or "1234." → Turn off, then turn on the Bluetooth device. Echo or noise occurs. → Adjust the microphone unit position. → Adjust the echo volume or noise reduction volume. (Page 42) The unit does not respond when you try to copy the phonebook to the unit. → You may have tried to copy the same entries (as stored) to the unit. "Connection Error" appears. → The device is registered but the connection has failed. Connect the registered device. (Page 41) "Please Wait..." appears. → The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again (or reset the unit). "No Voice Device" appears. → The connected mobile phone does not have a voice recognition system. "No Data" appears. → No phonebook data is contained in the connected Bluetooth phone. "Initialize Error" appears. → The unit has failed to initialize the Bluetooth module. Try the operation again. "Dial Error" appears. → Dialing has failed. Try the operation again. "Hung Up Error" appears. → The call has not ended yet. Park your car, and use the connected mobile phone to end the call. "Pick Up Error" appears. → The unit has failed to receive a call. Monitor section Picture Size (W × H) DDX795/DDX775BH/ DDX6018BT/DMX6018BT/ DDX718WBTL/DMX718WBTL: 6.95 inches (diagonal) wide 156.6 mm × 81.6 mm (6-3/16" × 3-3/16") Display System Drive System Number of Pixels Effective Pixels Pixel Arrangement Back Lighting DDX5018BT/DDX595/ DDX575BT: 6.2 inches (diagonal) wide 137.5 mm × 77.2 mm (5-7/16" × 3-1/16") Transparent TN LCD panel TFT active matrix system 1 152 000 (800H × 480V × RGB) 99.99% RGB striped arrangement LED ENGLISH 73