Kenwood DMX7018BT Instruction Manual - Page 14

Disc (Only for DDX7018BT/DDX7018BTM/DDX718WBT/DDX718WBTM) • If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. • For playable disc types, file types and other information, see pages 53 and 54 . • If " " appears on the screen, the unit cannot accept the operation you have tried to do. - In some cases, without showing " ", operations will not be accepted. • When playing back a multi-channel encoded disc, the multi-channel signals are downmixed. DDX718WBT/DDX718WBTM: Press MENU on the monitor panel, touch [Angle] on the pop-up short-cut menu to open the monitor panel, then insert a disc. Label side up Inserting a disc DDX7018BT/DDX7018BTM: Press M on the monitor panel to display the screen, touch [M DISC EJECT] to open the monitor panel, then insert a disc. Label side up E.g. Inserting a disc for DDX718WBT • After the disc is loaded, the monitor panel closes automatically. The source changes to "DISC" and playback starts. • The IN indicator lights up while a disc is inserted. 2 Eject a disc. On the screen, then touch as follows: • When removing a disc, pull it out horizontally. • You can eject a disc while playing another AV source. • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. To close the monitor panel: On the touch panel: After removing the disc, touch [M DISC EJECT] on the screen. On the monitor panel (only for DDX7018BT/ DDX7018BTM): After removing the disc, press M. E.g. Inserting a disc for DDX7018BT Ejecting a disc 1 Display the . DDX7018BT/DDX7018BTM: Press M on the monitor panel. DDX718WBT/DDX718WBTM: Press MENU on the monitor panel, then touch [Angle] on the pop-up short-cut menu. 12 ENGLISH