Kenwood DMX7018BT Instruction Manual - Page 32

Bluetooth® Making a call 1 Display the phone control screen. On the Home screen, touch as follows: 2 Select a method to make a call. 1 From the call history* (missed calls/received calls/dialed calls) 2 From the phonebook* 3 From the preset list (Page 31) 4 Use direct number entry 5 Use voice dialing 3 Select a contact to make a call. A When item 1, 2 or 3 is selected in step 2: • If the selected contact has several phone numbers, the phone number list is displayed. Select a phone number to make a call. To use alphabet search in the phonebook 1 Touch [ A-Z ]. 2 Touch the first letter you want to search for on the keypad. To search for a number, touch [1]. 3 Select a contact you want to call from the list. • You can select a first name or last name to use when sorting the list in alphabetical order on the screen. (Page 32) B When item 4 is selected in step 2: Enter the phone number (1), then make a call (2). C When item 5 is selected in step 2: Say the name of the person you want to call. • You can also make voice dialing by pressing and holding the VOICE on the monitor panel. • Available only when the connected mobile phone has a voice recognition system. • If the unit cannot find the target, "Press [Restart] to restart the voice recognition process." appears. Touch [Restart], then say the name again. • To cancel voice dialing, touch [Stop]. Switching between two connected devices You can change the device to use when two devices are connected. On the phone control screen: • To enter "+", touch and hold [0/+]. • To clear the last entry, touch [BS]. * Applicable only for mobile phone compatible with PBAP (Phone Book Access Profile). The active device is highlighted. 30 ENGLISH