Kenwood DMX7018BT Instruction Manual - Page 53
For Ddx718wbt/ddx718wbtm
View all Kenwood DMX7018BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Installation and Connection For DDX718WBT/DDX718WBTM 10 A fuse STEERING REMOTE [ % % % Connector D: To the car's steering remote harness • Depending on the type of vehicle, it cannot be connected. ' Connect the antenna cord to the antenna terminal. USB input terminal (1 m) Purple with white stripe ¥ REVERSE To the car's reverse lamp harness when using the optional rear view camera Light green To the car's parking brake detection switch harness PRK SW Extension wire ( ø ) (For best safety, be sure to connect the parking sensor.) Blue with white stripe (12 V 200 mA) P.CONT Brown MUTE To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna Not used. Connector B: To the car's harness Connector A: To the car's harness Pin A1 Orange/White A2 Yellow A3/A5 Blue Color and Function Dimmer Battery Antenna control (12 V 300 mA) A4 Red Ignition (ACC) A6 Black Ground connection A7/A8 White with black stripe [ / White ] Left speaker (front/mid range*) A9/A10 Gray with black stripe [ / Gray ] Right speaker (front/mid range*) B1/B2 Green with black stripe [ / Green ] Left speaker (rear/tweeter*) B5/B6 Purple with black stripe [ / Purple ] Right speaker (rear/tweeter*) D21 White Input 1 D22 Red Input 2 D23 Black Ground * For 3-way speaker system connection, see page 48. ENGLISH 51