Kenwood DNX6190HD Instruction Manual - Page 41

Return to the Top page Setting Up Language setup 1 Touch [SET] of [Language] in the User Interface screen. Language Setting screen appears. 2 Set each item as follows. Touch panel adjustment 1 Touch [Touch] in the System Menu screen. Touch Panel Adjustment screen appears. 2 Follow the instruction on the screen and touch the center of each . Select Mode Selects the mode to select a language. Easy (Default): Selects a language easily. Advanced: Allows you to select languages for respective items.* Language Select Selects a language. * If you select [Advanced] for Select Mode, the following screen appears. GUI Language Select: Selects the display language used for the control screen and so forth. Navigation Language Select: Selects the language used for navigation. Text Language Select: Selects the language used for tag text (song information). 3 Touch [Enter]. NOTE • To cancel the language setup, touch [Cancel]. NOTE • To cancel the touch panel adjustment, touch [Cancel]. • To reset to the initial status, touch [Reset]. Security setup A red indicator will blink on the unit after the ACC is set to OFF, warning potential thieves. If turned to "ON" (default), the security indicator on the front panel flashes when the vehicle ignition is off. 1 Touch [Security] in the System Menu screen. Security screen appears. 2 Touch [ON] or [OFF] of [SI]. 80 EXT SW setup Set up the external switch power mode. 1 Touch [EXT SW] in the System Menu screen. EXT SW screen appears. 2 Set each item as follows. Return to the Top page Setting Up Setup memory Audio Control, AV-IN SETUP, Camera, and Audio SETUP settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Touch [SETUP Memory] in the System Menu screen. SETUP Memory screen appears. 2 Follow the instruction on the screen. SW Name Sets the name of the external device. Output Pattern Sets the power signal output mode among "Pulse"/"Level". Default is "Pulse". You can set to turn output on/off each time the button on the EXT SW screen is touched. See External Device Control (P.88). Pulse Set Sets the pulse signal output time. Outputs 500ms when "1" is set. Increases by 200ms with each step. Up to 100 steps can be set. NOTE • You can enter characters only after you have applied the parking brake. • "Pulse": Generates a single power signal pulse. • "Level": Continues output of high power signal. [Lock]/[Unlock]* Locks or unlocks the AV-IN SETUP, and Audio SETUP settings. Yes Memorizes or recalls the settings. No Cancels the function or memorization. The SETUP Menu screen appears again. * W hen [Lock] is selected, you cannot change the AV-IN SETUP, and Audio SETUP settings. Also, the locked key mark is displayed under each setting icon in the setup menu. Continued 81