Kenwood DNX6190HD Instruction Manual - Page 44
Camera Setup, Software Information, AV Input Setup, Rear Camera, R-CAM Interruption, R-CAM Settings - bluetooth update
View all Kenwood DNX6190HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Return to the Top page Setting Up Camera Setup You can set camera parameters. 1 Touch [Menu] on any screen. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Camera]. Camera SETUP screen appears. 4 Set each item as follows. Rear Camera*1 Selects the type of rear camera to use. CMOS-3xx: When the CMOS-300 series with ID 1 set is connected. Other (Default): When the other camera is connected. R-CAM Interruption Sets a method for switching the display. Setting values are ON and OFF. ON: Switches to the rear view camera video display when shifting to reverse or pressing the or button for 1 second. OFF (Default): Switches to the rear view camera video display when pressing the or button for 1 second. R-CAM Settings*2 Adjusts the CMOS-300 series with ID 1 set. For details, see the instruction manual of your camera. Front Camera*1 Turn this setting on when the CMOS-300 series with ID 2 set is connected. Setting values are ON and OFF. Default is "OFF". F-CAM Settings*3 Adjusts the CMOS-300 series with ID 2 set. For details, see the instruction manual of your camera. *1 T hese settings become settable only when the parking brake is on. *2 T his setting becomes settable only when the parking brake is on and the CMOS-300 series is selected. *3 T his setting becomes settable only when the parking brake is on and "Front Camera" is set to [ON]. 86 Software Information Check the software version of this unit. 1 Touch [Menu] on any screen. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Software]. Return to the Top page Setting Up AV Input Setup You can set AV input parameters. 1 Touch [Menu] on any screen. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Source]. Software Information screen appears. 4 Confirm the software version. Touch [Update] as necessary. 4 Touch [AV-IN SETUP] in the list. AV-IN SETUP screen appears. 5 Set each item as follows. NOTE • For how to update the software, see the relevant update procedure manual which comes with the software. • [Bluetooth Module Version] is available only . iPod AV Interface Use*1 Sets the terminal which iPod is connected. Setting values are iPod and AV-IN2. Default is "iPod". AV-IN1 Name/AV-IN2 Name*2 Sets a name to be displayed when you select a system that is connected via the AV INPUT port. Default is "VIDEO". *1 T his item can be set when in STANDBY source and also the iPod is disconnected. *2 [AV-IN2 Name] becomes settable when "AV-IN2" is selected in [iPod AV Interface Use]. 87