Kenwood DNX6190HD Instruction Manual - Page 47
Car type setup, DSP select, Elevation, Audio Setting Up - bypass
View all Kenwood DNX6190HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Return to the Top page Audio Setting Up Car type setup You can setup the car type and speaker network, etc. 1 Touch [Car Type] in the Audio SETUP screen. Car Type screen appears. 2 Select your car type from the list. Speaker location setup 1 In the Car Type screen, touch [Location]. Speaker Location screen appears. 2 Select the speaker locations using [3]. NOTE • If your car type is selected, the Delay Time Alignment is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. Front Speaker Select the location from "Door"/ "On Dash"/ "Under Dash". Rear Speaker Select the location from "Door"/ "Rear Deck", "2nd Row"/ "3rd Row" (Minivan, Minivan (Long)). DSP select You can select whether using DSP (Digital Signal Processor) System. 1 Touch [Bypass] or [Through] of [DSP Select] in the Audio SETUP screen. Return to the Top page Audio Setting Up Elevation You can raise the sound position heard from the speakers virtually. 1 Touch [Elevation] in the Audio SETUP screen. Bypass There is no effect by DSP. Through There is an effect by DSP. NOTE • When the mode is set to [Bypass], DSP System cannot be adjusted. Elevation screen appears. 2 Select Elevation level from [High], [Low], and [OFF]. 92 93