Kenwood DPX794BH Instruction Manual - Page 37
Sw Lpf Slope]
View all Kenwood DPX794BH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Audio Settings [X ' OVER] [TWEETER] [FRONT HPF] [REAR HPF] [SUBWOOFER LPF] [FRQ] [GAIN LEFT] [GAIN RIGHT] [F-HPF FRQ] [F-HPF SLOPE] [F-HPF GAIN] [R-HPF FRQ] [R-HPF SLOPE] [R-HPF GAIN] [SW LPF FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/ [6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]: Adjusts the crossover frequency for the tweeter speaker. [-8] to [0]: Adjusts the output volume of the left tweeter. [-8] to [0]: Adjusts the output volume of the right tweeter. [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/ [90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [220HZ]/[250HZ]: Adjusts the crossover frequency for the selected speakers (high pass filter). ; [THROUGH]: All signals are sent to the selected speakers. [-6DB]/[-12DB]/[-18DB]/[-24DB]: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [F - HPF FRQ].) [-8] to [0]: Adjusts the output volume of the selected speaker. Configure the settings for the rear speakers similarly to the front speakers. [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/ [90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [220HZ]/[250HZ]: Adjusts the crossover frequency for the subwoofer (low pass filter). ; [THROUGH]: All signals are sent to the subwoofer. [SW LPF SLOPE] [-6DB]/[-12DB]/[-18DB]/[-24DB]: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [SW LPF FRQ].) [SW LPF PHASE] [REVERSE] (180°)/[NORMAL] (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. [DTA SETTINGS] [CAR SETTINGS] [SW LPF GAIN] [-8] to [0]: Adjusts the output volume of the subwoofer. For settings, see "Digital Time Alignment settings" on page 32. • The following item is selectable only if [SUBWOOFER SET] is set to [ON] (page 30): - [SUB-W LEVEL] - [SW LEVEL] of [EASY EQ] - [SUBWOOFER] of [SPEAKER SIZE] - [SUBWOOFER LPF] of [X ' OVER] - [SUBWOOFER] of [DISTANCE] and [GAIN] in [DTA SETTINGS] • The following item is selectable only if a setting other than [NONE] is selected for [TWEETER], [REAR] and [SUBWOOFER] of [SPEAKER SIZE]: - [TWEETER], [REAR HPF], [SUBWOOFER LPF] of [X ' OVER] ENGLISH 31