Kenwood DPX794BH Instruction Manual - Page 43
Removing the unit, Installing the unit without mounting sleeve, Installing in Toyota cars
View all Kenwood DPX794BH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installation/Connection Installing in Toyota cars (For / / ) Install onto the car brackets using screws (E) or (F) (supplied). Use the mounting holes ( ) or ( ) that fit the car brackets. Then, install the supplied trim plate (C). Do the required wiring. (Page 38) Car bracket* Dashboard of your car Installing the unit (without mounting sleeve) Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied). • For / / : Remove the mounting sleeve and trim plate from the unit before installing. (For / / / / ) (For ) Use only the specified screws. Using wrong screws might damage the unit. Removing the unit (For / / ) 1 Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out. 2 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the illustration. * Only for illustration purpose. ENGLISH 37