Kenwood KXF-W6010 User Manual - Page 10

Preparation for playback (recording) Before playback (recording) 10 1 Set the TIMER switch to OFF. TIMER REC OFF PLAY CT-2050/203/KXF-W6010/W4010 (En/M) 2 Set the POWER switch to ON. POWER -ON -OFF : Keys and control used in the operations described on this page. Playback (recording) preparation 1 Load a cassette tape in deck A or B. 1 Press the eject (0) key. 0 2 Insert a tape and close the cassette holder. Deck A: Playback only. (CT-203/ KXF-W4010 only) Playback/recording available. (CT-2050/KXF-W6010 only) Deck B: Playback/recording available. ÷ Be sure to remove tape slack before insertion. ÷ The type of tape, that is, the Normal, High position or Metal position (playback only) is selected automatically. ÷ This unit cannot record sound on a Metal tape. ÷ Be sure to close the cassette holder securely by pushing it. Normal position High position Metal position (playback only) TYPE TYPE TYPE A B 2 Select the tape transport direction. 1 Press the play (2 or 3) key. 2 To play (record) tape side B. 7 3 To play (record) tape side A. Feed the tape section which cannot be played or recorded onto in the forward direction. 2 Press the stop (7) key. 2 7 3 Tape transport direction indicators The 2 and 3 indicators show the direction the tape is transported during recording or playback. The direction used when the tape is last stopped is held in memory even after this unit has been turned OFF, and the tape transport starts in the indicated direction when the unit is started automatically by a timer, etc. To change the tape transport direction, press the play key for the opposite direction and immediately press the stop (7) key. Deck A direction indicators. Deck B direction indicators. 3 Determine the playback (recording) condition. 1 Select the playback (recording) mode. REV.MODE 2 Select the Dolby NR mode. DOLBY NR Each press switches the indication. 1 "[" :Double-side playback (recording) which stops tape stops after having played (or recorded) both sides. 2 """ :Playback is endless, but recording stops after having recorded both sides. 3 """ :One-way playback (recording) which stops tape after having played (or recorded) a single side. Each press switches the indication. 1 DOLBY NR "OFF" (extinguished): Dolby NR is not used. 2 DOLBY NR "B": Noise reduction of the ordinary type. 3 DOLBY NR "C": Noise reduction with higher performance. ÷ Select the Dolby NR mode according to the tape recording status.