Kenwood KXF-W6010 User Manual - Page 23

Timer operations This unit incorporates a built-in timer standby function. By using an audio timer optionally available in the market, wake-up playback and unattended recording of tape can be started at any time of the day. Connect the power cords of the components directry or indirectly to the timer so that their powers can be turned on via the timer. The timer setup operation varies depending on the timer. Also read carefully the instruction manual of your audio timer. Preparation 1 Set the power switches of the components to ON. 2 Set the input selector of the amplifier to TAPE. 3 Make "Playback (recording) preparation". 0 (If relay playback is required, insert tapes in both decks A and B.) Timer playback of tape 1 Start playback. REVERSE 2 STOP 7 FORWARD 3 Audio timer CT-2050/203/KXF-W6010/W4010 (En/M) To AC outlet 23 Tuner Amplifier (CT-2050/203/KXF-W6010/W4010) 2 Adjust the volume of the amplifier. 3 Rewind the tape(s) to the start position. 1 ¡ 4 Set the TIMER switch to PLAY. TIMER REC OFF PLAY 5 Set the timer. ÷ Set the timer so that the tape starts at the desired time of the day. ÷ When the set time comes, tape playback starts automatically. ÷ Read carefully the instruction manual of your audio timer. Notes 1. When connecting the KENWOOD equipment (amplifier, CD player) and the system, remove the disc from the CD player. 2. If relay playback is required, set to "[" or """. 3. If tapes are inserted in both decks A and B, timer playback starts with deck B. 4. Switch on the power to the cassette deck. (The timer will not operate if it is switched off.)