Kenwood KXF-W6010 User Manual - Page 17

How to record (CT-203/KXF-W4010; Deck B only) CT-2050/203/KXF-W6010/W4010 (En/M) 17 4 Start recording. 1 Press the REC/ARM (¶) key. CT-2050/KXF-W6010 ¶REC/ARM CT-203/KXF-W4010 Press once. 2 Play the music source from the beginning. ÷ Recording will start. ÷ The deck enters the stop mode automatically when the tape has been recorded till the end. Bias level adjustment (Deck B of the CT-2050/KXF-W6010 only) The MODE key can be used to adjust the bias level. 1 Press the MODE key and select the "BIAS" mode. MODE 2 Adjust the bias level. Each press of the MODE key changes the setting. 1 "LEVEL" lights up: Recording level setting mode 2 "BAL." lights up: Recording balance setting mode 3 "BIAS" lights up: Recording bias setting mode (Deck B of the CT-2050/KXF-W6010 only) 4 "LEVEL","BAL.",and "BIAS"go off: Counter display mode lights up ∞ MIN/L The high frequency decreases. REC LEVEL/BAL. /BIAS ∞ MAX/R The high frequency increases. ÷ To adjust the bias level, play back the recorded sound and adjust to the suitable level.Repeat if necessary. ÷ The bias can be adjusted to a value of ±3. How to use the MPX FILTER key Use this function when recording a radio (FM) broadcasts. MPX FILTER Depending on the tuner, a recorded FM broadcast may produce a "beat" sound. In this case, press the MPX FILTER key before recording. To cancel, press the MPX FILTER key again. lights up