Kenwood KXF-W6010 User Manual - Page 21

Convenient CD recording (CT-203/KXF-W4010; Deck B only) CT-2050/203/KXF-W6010/W4010 (En/M) By connecting this unit with a KENWOOD "f", "ƒ", " (ƒ)", type amplifier (receiver) with a SYSTEM CONTROL jack 21 and a KENWOOD CD player with a SYSTEM CONTROL jack using system control cords, recording on this unit and playback on the CD player can be started simultaneously. Since this unit is not designed for recording with metal (TYPE ) tapes, do not use metal tapes for recording. Preparation 1 Complete the connections referring to "System connections". 6 2 Make "Playback (recording) preparation". 0 (CT-203/KXF-W4010; Insert a tape in deck B.) 3 (Load a disc in the CD player.) : Keys and control used in the operations described on this page. CD synchro recording 1 Perform auto-bias adjustment. (The bias adjustment is applied to deck B.) AUTO BIAS ÷ The optinum bias is set in about 40 seconds, after which the deck enters stop mode. ÷ For a fine adjustment after setting AUTO BIAS, refer to the description of "Bias level adjustment". (CT-2050/KXF-W6010 only) & 2 Adjust the recording level. ÷ To cancel the auto-bias adjustment operation in the middle, press the stop (7) key. ÷ Recording is possible even when the auto-bias setting is omitted. 1 Play a CD. 2 Set the record-pause mode. 8PAUSE ¶REC/ARM 3 Adjust the recording balance 4 Put the CD player in stop and recording level. mode. Press the 6 key of the CD player. ÷ While pressing the PAUSE (8) key, press the REC/ARM (¶) key. "How to record." ^ Press 7 key of the CD player. 3 Set the record-pause mode. CT-2050/KXF-W6010 8PAUSE ¶REC/ARM CT-203/KXF-W4010 ÷ While pressing the PAUSE (8) key, press the REC/ARM (¶) key. 4 Start playing the CD. Press the 6 key of the CD player. ÷ Synchro recording is not possible when tracks of more than one CD are programmed using a Carrousel type CD player. ÷ Recording starts at this moment. ÷ When the CD player has completed playback, the cassette deck stops recording and enters the stop mode. To pause To restart recording To stop : Press the 6 key of the CD player. : Press the 6 key of the CD player. : Press the 7 key of the CD player. ÷ If the stop (7) key of the cassette deck is pressed, the cassette deck enters the stop mode but the CD player does not stop.