Kenwood KXF-W6010 User Manual - Page 12

This function plays back the tapes in both decks A and B 12 continuously and repeatedly. Listening to cassette tape CT-2050/203/KXF-W6010/W4010 (En/M) Relay playback 1 Load cassette tapes in both decks. 1 Open the cassette holders of decks A and B. 0 2 Insert cassette tapes and close the cassette holders of decks A and B. Deck A: Playback only. (CT-203/ KXF-W4010 only) Playback/recording available. (CT-2050/KXF-W6010 only) Deck B: Playback/recording available. A B 2 Determine the playback condition. 1 Select the playback (recording) mode. REV.MODE 2 Select the Dolby NR mode. DOLBY NR 3 Start playback. 2 7 3 : Keys and control used in the operations described on this page. ÷ Be sure to remove tape slack before insertion. ÷ Be sure to close the cassette holder securely by pushing it. Each press switches the indication. 1 "[" : Relay playback of two sides of tapes in decks A and B is repeated. 2 """ : Relay playback is not available with this setting. 3 """ : Relay playback of only one side of tapes in decks A and B is repeated. Each press switches the indication. 1 DOLBY NR "OFF" (extinguished): Dolby NR is not used. 2 DOLBY NR "B": Noise reduction of the ordinary type. 3 DOLBY NR "C": Noise reduction with higher performance. ÷ Select the Dolby NR mode according to the tape recording status. ÷ Tapes are played in the directions indicated by their respective indicators on the display. ÷ The playback starts with the deck the play key of which is pressed. To Stop relay playback Press stop (7) key of the deck that is playing. 2 7 3