Konica Minolta AccurioPress C14000 Plockmatic SD-350/SD-500 System Operator Ma - Page 16
User Interface, Control Panel, The Start Screen, Settings for Booklet Production, Detailed Settings
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
User Interface The Plockmatic SD-500 or SD-350 Production Booklet Maker System is controlled from a panel located on the Booklet Maker. The control panel will allow you to set up, adjust and operate the complete system. An optional "Alive logo" makes the state of system visible from a distance. NOTE: Depending on modules and features installed, the screen may look different from what you see here. Some functions are greyed out or not visible at all and remaining buttons may stretch to fit the screen. This manual will most often show a fully configured system. Control Panel The control panel is of touch screen type. Point at the screen and press the "button" to reach the desired function or change the desired setting. The Start Screen When the system power is switched on, the Start screen will be shown. From here you can choose to set up Booklet Production, perform a Guided Start, retrieve stored jobs or access the General System Settings. Settings for Booklet Production Pressing the [Booklet Production] button in the Start Screen opens the Settings for Booklet Production screen. From here you can reach all detailed settings for setting up the job. A counter shows the number of booklets produced. Clear will reset. Detailed Settings Pressing, for example, the [Staple] button in the Settings for Booklet Production screen opens the Staple settings screen. Here you can perform detailed settings concerning stapling. Explore this and other settings more thoroughly in section 2, "Making Booklets." 16