Konica Minolta AccurioPrint C2060L AccurioPress C2070/C2070P/C2060/Print C2060 - Page 102
marks on the [front] side., marks of [1] to [4] printed on
View all Konica Minolta AccurioPrint C2060L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
5.1 Both Sides Adjustment / Press [Exit Print Mode]. 0 Measure a misalignment between the marks of [1] to [4] printed on the [back] side of the output chart and the marks on the [front] side. >@ - The figure shows an example to measure [1]. The scale resolution is 0.5 mm. EDFN - In this figure, the black mark indicates the front side and the blue mark indicates the back side. - Measure a misalignment between printing positions in the horizontal direction (X axis) and vertical direction (Y axis). - The measurement value can be entered in units of up to 0.1 mm. \ [ - For example, as shown in the figure, if at point [1] is misaligned 2.0 mm in the plus side of the X direction and 1.5 mm in the minus side of the Y direction compared with the front side, press [2] - [0] - [+/-] in the X direction to enter "-2.0" as the adjustment value, and press [1] - [5] in the Y direction to enter "+1.5" as the adjustment value. Then, at point [1], the blue line on the back side will be moved 2.0 mm toward the minus side of the X direction and 1.5 mm toward the plus side of the Y direction. - Write down the measured values so that you do not forget them. 5-20