Konica Minolta AccurioPrint C2060L AccurioPress C2070/C2070P/C2060/Print C2060 - Page 88
Original Glass, Place an adjustment chart on the, Place the background sheet on the, then close
View all Konica Minolta AccurioPrint C2060L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
5.1 Both Sides Adjustment - Place an adjustment chart on the Original Glass. Open the ADF, then place an adjustment chart with the front side facing up (not facing the Original Glass), setting the top side flush with the far end of the glass. Place the upper-left corner of the adjustment chart approximately 2 inches (approximately 5 cm) away from the vertical size guide and horizontal size guide respectively on the Original Glass making sure that the left and top sides are parallel to the vertical size guide and horizontal size guide respectively. . Place the background sheet on the Original Glass, then close the ADF. Place the black side of the background sheet facing down (facing the original glass), then set it flush with the vertical size guide and horizontal size guide as shown below. Exercise care to ensure the previously set adjustment chart is not misaligned. 5-6