Konica Minolta C83hc High Chroma AccurioPress C3080/C3080P/C3070/Print C3070L
Konica Minolta C83hc High Chroma Manual
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta C83hc High Chroma manual content summary:
- Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 1
Quick Guide 1 Before Getting Started 2 Let's Make Prints 3 Basic Operations 4 Troubleshooting 5 Appendix IC-605/IC-313/IC-314/IC-417 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 2
Guide] describes basic operations, maintenance, troubleshooting for this machine. This information will be useful to enable the full capabilities of this machine and to utilize such functionality efficiently. Please keep this manual or originals. Follow the instructions to avoid property damage. - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 3
machine is designed to be used as a digital printing system for the following purposes: - Print components, - All safety instructions in the related user's guides are observed, - Legal restrictions on and perform the maintenance and troubleshooting described in user's guides. - Administrator: Person who - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 4
the machine is required to enable users to perform maintenance work or troubleshooting operations. Maintenance and troubleshooting operations should be carried out as instructed in this guide and the HTML User's Guide. Should you experience any problems, contact your service representative. x-ii - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 5
Guide operating environment )Supported Operating Systems/Browsers This guide describes the operation verification in the operating systems and browsers shown below. Operating system Windows 7 (Service on your system environment. Please be forewarned. - Problems may be able to be solved by using the - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 6
AccurioPress C3080P Microsoft Windows Conventions used in this guide This machine: Indicates the entire system including options 506 Saddle Stitcher SD-510 Saddle Stitcher SD-513 Conventions used in this guide Image controller ADF Saddle Stitcher The convention above is also applied to other - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 7
Intended use x-i Impermissible operating conditions x-i Exclusion of liability x-i Target groups x-i Configuration and Usage of this Guide x-ii HTML User's Guide operating environment x-iii Supported Operating Systems/Browsers x-iii Display resolution x-iii How to display the top page of the - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 8
Setting 3-5 Specifying paper information for a tray 3-5 4 Troubleshooting 4.1 Replenish and Replace Consumables 4-1 Replacing a toner bottle box 4-5 4.2 Clearing Paper Jams 4-7 How to view the animation guide 4-7 [JAM Position] screen 4-7 Illustration screen for Jam handling 4-8 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 9
screen has been displayed, the default screen is displayed. The default screen can be selected from Utility/Counter. For details, refer to the HTML User's Guide. When [Ready to print] is displayed on the [MACHINE] screen, you can use this machine. 1-1 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 10
this machine has started completely, turn the image controller on. - For Image Controller IC-417, turn the power switch in the rear side on ( ), then press the button on the top of the power switch ( ). - For Image Controller IC-313, turn the power switch in the rear side on ( ), then - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 11
AccurioPress C3080/C3080P/C3070 AccurioPrint C3070L - For Image Controller IC-314, open the front door and press the Power controller button. [Windows] starts, and after a while, the [workspace] screen is displayed. Wait until the [workspace] screen is displayed. 1 Tips If [Machine is - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 12
panel is changed from blue to orange. NOTICE NOTICE While the following message is displayed, do not turn off the main power switch. Otherwise, a problem such as a toner fixation in the machine may occur. ON OFF [Cooling in progress / Power is turned off automatically] [Power off in progress - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 13
power off (Image Controller IC-417) " On the [MACHINE] screen, press [Controller]. AccurioPress C3080/C3080P/C3070 AccurioPrint C3070L # Press [Login]. $ Select [Administrator] or [Operator], enter the password, then press [Login]. The default password is "Fiery.1". If you select 1 [Operator - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 14
1.1 Turning the Power ON/OFF % Press [Waiting Jobs]. & Press the [Tools] tab. ' Press [Restart Server]. ( Press [Shut Down System]. 1-6 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 15
) Press [Exit]. NOTICE NOTICE While the following message is displayed, do not quit the system. Otherwise, a problem such as a toner fixation in the machine may occur. [Cooling in progress / Power is turned off automatically] [Power off in progress / Please do not turn - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 16
panel is changed from blue to orange. NOTICE NOTICE While the following message is displayed, do not turn off the main power switch. Otherwise, a problem such as a toner fixation in the machine may occur. [Cooling in progress / Power is turned off automatically] [Power off in progress / Please do - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 17
system as needed. - To reset only the Fiery software, press the Menu button on the control panel, then use the or off. For details, refer to the User's Guide for the Fiery Color Server. 1 )Turning the power turn off the main power switch. Otherwise, a problem such as a toner fixation in the machine - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 18
1.1 Turning the Power ON/OFF # Turn off the main power switch. NOTICE NOTICE When turning the main power switch off then on, be sure to wait for 10 seconds or longer before turning the main power switch on again. If the main power switch is turned on again within 10 seconds, the machine may not - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 19
jobs exe- cuted in the printable state • Power Save on the control panel has been pressed for a sec- ond or more If the Auto Shut OFF mode is kept for a Auto Shut OFF only when the Im- mode. 1 age Controller IC- If you press [All Jobs] to highlight the button, the Shut Off mode is 605 is - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 20
methods to configure a setting. - If Power Save on the control panel is pressed for one second or more, either of Auto Low Power or Auto Shut OFF how to configure and use the above functions, refer to the HTML User's Guide. NOTICE NOTICE If this machine is turned off because the Weekly Timer has - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 21
AccurioPress C3080/C3080P/C3070 AccurioPrint C3070L 1.2 Available Operations in this Machine Major functions of this machine )Print functions This machine can be used as a printing system by installing an optional Image Controller. You can print data on this machine via the printer driver using the - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 22
by mounting an optional Image controller. In addition, you can give a scan instruction from a computer on the network to import the scan data to your 313, Image Controller IC314 or Image Controller IC-417, contact your service representative. - Scan functions are not available in the Printer model. - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 23
AccurioPress C3080/C3080P/C3070 AccurioPrint C3070L )Device control function Image Controller IC-605: PageScope Web Connection - PageScope Web Connection is a device control utility program provided by the HTTP server built in the machine. - You can access an Image Controller via the network using - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 24
computer. )Other applications In addition to the above, there are various applications to manage this machine or users. For details, refer to the HTML User's Guide. 1-16 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 25
AccurioPress C3080/C3080P/C3070 AccurioPrint C3070L Application functions (Image Controller IC-417 / Image Controller IC-313) )Fiery Command WorkStation Fiery Command WorkStation is an application that manages jobs and image controller via the network. Job management function The [Job Center] tab - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 26
that is used to completely delete the Fiery printer driver from the computer. For details about how to use this application, refer to the User's Guide supplied with the Fiery Color Server. )Fiery Remote Scan Fiery Remote Scan is an application that is used to perform remote scanning, to import - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 27
dragged and dropped in the folder to the image controller. For details about how to use this application, refer to the User's Guide supplied with the Fiery Color Server. Application functions (Image Controller IC-314) )workspace workspace is an application that manages jobs and image controllers - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 28
installation is completed, configure information of the mounted devices using the printer driver to use optional functions. For details, refer to the HTML User's Guide. Step 2: Load paper into a tray Load paper into the Main Body Trays or an optional paper tray. For details, refer to the following - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 29
4: Use the printer driver to print data Print original data through your computer. 0 Check the application environment of original data in advance. This guide shows a procedure example of how to use Adobe Acrobat Reader in a Windows 7 environment. " Click [Print] in the file menu of the application - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 30
you can select a tray to load paper to be printed into. - For information about other functions of the printer driver, refer to the HTML User's Guide. Image Controller IC-417 or Image Controller IC-313: Click [Quick Access] tab, then select the paper size in [Document size]. - In [Paper tray], you - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 31
. The items you can configure or adjust vary depending on where print jobs are saved on the HDD. For details, refer to the HTML User's Guide. - For information about how to take an action when data is printed with an incorrect paper size, refer to page 4-10. 2 2-4 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 32
2.1 Printing Flow Step 5: Check the finishing Check the image quality reproducibility, printing position misalignment, fold or staple position, and other items after printing data. For information about finishing checkpoints and adjustment procedures, refer to the HTML User's Guide. 2-5 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 33
Otherwise, the feed roller may not open or another machine trouble may occur. # Open the feed roller. $ Turn two side guide lock knobs (in the front and rear sides) counterclockwise to loosen them. % While pressing the side guide lock release lever ( ), slide it to any position ( ). - Slide both - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 34
lock knobs (in the front and rear sides) clockwise, and fix them. * Load the remaining paper into the tray, then press the rear guide plate against the paper. NOTICE NOTICE Do not load more than 500 sheets (80 g/m2 / 21 lb Bond) into Tray 1, and more than 1,000 sheets ( - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 35
one and the handle of the rear one. If moved only with the front side guide plate, the side guide plates may not be fixed in position. % While pressing the rear guide lock release lever, slide the rear guide plate to any positions. Determine their locations based on the size indicator of the bottom - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 36
to the HTML User's Guide. Be sure that the rear guide plate is securely pressed against the paper. If there is any gap between the rear guide plate and the paper, this machine will not be able to detect the correct paper size. It may cause a paper feeder machine trouble. Load paper with the print - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 37
standard-size paper is loaded, its size is recognized automatically. To load custom-size paper, specify the required size. " Press [Paper Setting] on the [MACHINE] screen. You can also press [Paper Setting] on the [COPY] screen to specify the required size. # Select the tray with paper loaded, then - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 38
3.2 Paper Setting % Press [Paper Size]. & Select one of the options under [Size Setting] to fit the paper loaded into the tray. 3-6 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 39
AccurioPress C3080/C3080P/C3070 AccurioPrint C3070L ' Specify the size. [Standard]: Recognized automatically. In [Detect Size Setting], you can select the size to be detected. There is, however, a group of sizes having subtle distinctions, so that the machine cannot distinguish in the operation of - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 40
Paper]: Specify the paper size and the number of tabs. ( If you select [Detect Size Setting] in [Standard], press [OK]. This returns to the [Size Setting] screen. This step is not required if you select [Custom] or [Tab Paper]. ) Press [OK]. This returns to the [Change Individual Set] screen. 3-8 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 41
[COPY] screen. Paper setting is then completed. Tips - For details about setting items, refer to the HTML User's Guide. 3 - To register paper conditions in a paper profile, press [Register & OK] on the [Change Individual Set] screen. For details about how to register a paper profile, refer to - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 42
4.1 Replenish and Replace Consumables 4 Troubleshooting 4.1 Replenish and Replace Consumables )Replacing a toner bottle WARNING WARNNIINNGG Do not throw toner or a container that contains toner (e.g., toner cartridge, developing unit, and Waste Toner - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 43
cover. Use of incorrect toner bottles may cause the machine trouble. " Press on the upper-right corner of the touch panel or Help on the control window shown in step 3 is displayed directly. # Press [Consumable/Scrap]. $ Follow the on-screen instructions to replace a toner bottle. - The number on - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 44
then place it into the package. For the subsequent treatment, contact your service representative. )Replacing a staple cartridge If staples run out, the message [ to replace staple cartridges, refer to the HTML User's Guide. " Press on the upper-right corner of the touch panel or Help on the control - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 45
] tab of the required saddle stitcher, then follow the on-screen instructions to replace a staple cartridge. The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, press [,]. NOTICE NOTICE The Saddle Stitcher SD-506 contains two staple - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 46
replace the box] is displayed on the [MACHINE] screen, and the [Waste Toner Box] indicator changes to yellow in the [Consumable and Scrap Indicators] display. " Press on the upper-right corner of the touch panel or Help on the control panel to display the help message. If you - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 47
# Press [Consumable/Scrap]. AccurioPress C3080/C3080P/C3070 AccurioPrint C3070L $ Press the [Waste Toner] tab, then follow the on-screen instructions to replace the waste toner box. The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 48
, the message [Mishandled paper / Please remove paper following the guide] is displayed, and the position of the paper jam is is displayed, and the position of the paper jam is indicated by a number. Tips - Pressing [Close] changes to the [MACHINE] screen. - Even while the [MACHINE] screen is being - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 49
Position] screen. Changing to the Illustration screen displays the procedure guidance, so you can clear a paper jam while checking each step. " Press [Illustration] on the [JAM Position] screen. # Check the displayed contents, then remove jammed paper. If the description spans multiple pages, [Next - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 50
Clearing Paper Jams % Remove all jammed paper, then press [Close]. This returns to the [MACHINE] screen. touch panel. If you cannot smoothly remove jammed paper, do not remove it forcibly. Contact your service representative. - Open and close the door of the part indicated by the number on the touch - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 51
touch [Confirm Details]] is displayed on the screen. To address this problem, load the specified paper into a tray, or you can forcibly with the specified paper " Press [Confirm Details] on the [MACHINE] screen. # Select a tray to replace paper into, then press [Change Setting]. $ Check the - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 52
4.3 If the Specified Paper is not Found % Replace paper into the tray, then press [Close]. & Press Start on the control panel. Printing starts using the selected tray. 4-11 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 53
)Forcibly printing using the loaded paper " Press [Confirm Details] on the [MACHINE] screen. AccurioPress C3080/C3080P/C3070 AccurioPrint C3070L # Select a tray with print paper loaded, then press [Forced Output]. $ Press Start on the control panel. Printing starts using the selected tray. 4 4-12 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 54
Paper is not Found )If using Image Controller IC-417 / Image Controller IC-313 " Press [Controller] on the [MACHINE] screen. # Press [Login]. $ Select [Administrator] or [Operator], enter the password, then press [Login]. If you select [Operator], you do not need to enter the password. 4-13 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 55
% Select the print job. AccurioPress C3080/C3080P/C3070 AccurioPrint C3070L & Press the tray in which print sheets are loaded. Printing starts using the selected tray. )If using Image Controller IC-314 Job information is displayed on - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 56
4.3 If the Specified Paper is not Found # Confirm the information and click [OK]. Screens of settings that are required are displayed in order. $ Select a [Tray] and click [Save]. 4-15 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 57
% Select a [Screen] and click [Save]. AccurioPress C3080/C3080P/C3070 AccurioPrint C3070L & When printing to a different paper size, right-click a job on hold and select [Job parameters] to change the paper size. 4 4-16 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 58
4.3 If the Specified Paper is not Found ' Select a [Paper size] in [Paper profile] and click [Save]. ( Right-click the job on hold and select [Run immediately]. The job is printed according to the changed paper settings. 4-17 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 59
IP address of the image controller in the address bar, and then press [Enter]. AccurioPro Print Manager starts and the registration dialog is displayed. data, use an HDD TWAIN driver. For details, refer to the user's guide for the HDD TWAIN driver. - Automatically delete scan data that are stored - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 60
4.5 Hue Adjustment 4.5 Hue Adjustment Various problems, for example, the current hue is different from adjustment flow: Normal - Regular adjustment flow: High Precision Reference For details about the Image Controller IC-605, refer to the HTML User's Guide. For details about the Image Controller IC- - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 61
Fusing Unit. In this case, adjust the image position (Both Sides Adjustment) again. Reference For details, refer to the HTML User's Guide. 4.7 If you forget the administrator password For details about the default administrator password, refer to [Safety Information]. If the administrator password - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 62
), then check the detailed contents. )How to use the search function The search field at the top of the manual can be used to search for the necessary information from the HTML User's Guide. Enter any keyword in the entry field, and click . The search results are displayed in the order in - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 63
5.2 Name of each Component External components AccurioPress C3080/C3080P/C3070 AccurioPrint C3070L 3 12 4 5 6 11 10 98 7 12 1 13 17 14 16 15 5 5-2 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 64
Printer model. 2 Sub power switch Turns machine power on/off when pressed. 3 Service port (USB 2.0 Type A e 3) Used to connect devices such as to allow various settings and machine operations. Also, operation or troubleshooting procedures can be provided. 5 Control Panel Used for various - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 65
Controller IC-314, or Image Controller IC-417 to this machine by cable. 21 Service port (USB 3.0/2.0 Type A x 1) Used to connect devices such as an external for cooling fan in order to keep out dust. 25 Lock release lever Pressed to the back to open downward for removal of paper jam. The lock - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 66
equipped. Required to use this machine as a printer or scanner. Turns the sub power of Image Controller IC-314 on or off. Open this to press the Power controller button. 5-5 - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 67
unit 8 Side guide lock release lever 9 Rear guide plate 10 Side guide plate 11 Feed roller Description Used only by service representative to turn handling levers and knobs of the conveyance fixing unit, follow the instruction on the screen to be displayed when paper jam occurs. Forms - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 68
guide plates. Collects waste toner. WARNING: Explosion The toner may ignite and cause a dangerous situation. NEVER throw the waste toner box into a fire. CAUTION: High machine or cause unexpected trouble. Please do not try to work yourself, but contact your service representative. CAUTION CAUTION - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 69
Control Panel Layout AccurioPress C3080/C3080P/C3070 AccurioPrint C3070L 20 19 18 17 16 No. Name 1 Keypad 2 Reset* 3 Power LED 4 Data LED 5 Interrupt* 6 Stop 7 Proof Copy* 8 Start 9 Start LED 10 C (Clear) 1 2 3 4 5 6 7 15141312 11 10 9 8 Description Enters numeric values. - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 70
the power-saving mode. Also, activates power-saving mode manually when pressed. Lights when any power-saving mode is activated, or the operation immediately when the Service Call Screen is displayed and output cannot be continued any more. - Otherwise, an unexpected trouble may be caused. Write down - Konica Minolta C83hc High Chroma | AccurioPress C3080/C3080P/C3070/Print C3070L - Page 71
http://www.konicaminolta.com A9VE-QG-E-00 © 2017 2017.10
Before Getting Started
Let's Make Prints
Basic Operations
Troubleshooting
Appendix
1
2
3
4
5
IC-605/IC-313/IC-314/IC-417
Quick Guide