Konica Minolta C83hc High Chroma AccurioPress C3080/C3080P/C3070/Print C3070L - Page 35
Loading paper into the Paper Feeder Unit PF-602m, To fix
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
AccurioPress C3080/C3080P/C3070 AccurioPrint C3070L Loading paper into the Paper Feeder Unit PF-602m The following describes how to load paper into an optional Paper Feeder Unit PF-602m. The same paper loading procedure is used for Tray 3 and Tray 4. Reference For information about how to load paper into other optional paper feeder unit, refer to the HTML User's Guide. " Pull out the tray to load paper into. NOTICE NOTICE Trays cannot be withdrawn when the machine is powered off. Turn the sub power switch on. To prevent the machine from tipping over, multiple trays cannot be pulled out at one time. # Turn the side guide lock knobs (4 pieces) counterclockwise to loosen them. $ While pressing the side guide lock release lever ( ), slide the side guide plates to any positions ( ). Determine their locations based on the size indicator of the bottom plate of the tray. NOTICE NOTICE When moving the side guide plates, be sure to hold the lock release lever of the front one and the handle of the rear one. If moved only with the front side guide plate, the side guide plates may not be fixed in position. % While pressing the rear guide lock release lever, slide the rear guide plate to any positions. Determine their locations based on the size indicator of the bottom plate of the tray. 3 & To fix the side guide plates at the correct locations, load an appropriate amount of paper into the tray while aligning it to the left-hand side of the tray. NOTICE NOTICE Load paper with the print side facing up. ' Press the side guide plates against paper, then turn the side guide lock knobs (4 pieces) clockwise to fix them. 3-3