Konica Minolta KIP 9900 User Guide - Page 117

Incorrect Red

Get Konica Minolta KIP 9900 PDF manuals and user guides View all Konica Minolta KIP 9900 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 117 highlights

3. The mis-fed media can be seen inside. Check if it is already cut or not. • If already cut, remove it and go to the procedure 7. • If not cut yet, go to the next procedure 4 for cutting it. 4. Rotate the Cutter Handle for 1 revolution clockwise to cut the roll media. Cutter Handle NOTE The Cutter Blade needs to be placed at its home position correctly after the above operation. After cutting the media rotating the Cutter Handle, place the green part inside of the notch. If red part is seen in the notch, the Cutter Blade is not correctly placed to its home position. And at this time take care for the following points. • Do not rotate the Cutter Handle counter-clockwise. It will damage the Cutter Blade. • Do not rotate the Cutter Handle more than once. If it is rotated many times, very small paper portion will be left in the cutter unit. This will cause the error. Correct (Green) Incorrect (Red) 3-13 Chapter 3 Error Correction & Maintenance

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
Chapter 3
Error Correction & Maintenance
3-13
3.
The mis-fed media can be seen inside. Check if it is already cut or not.
•
If already cut, remove it and go to the procedure 7.
•
If not cut yet, go to the next procedure 4 for cutting it.
4.
Rotate the Cutter Handle for 1 revolution clockwise to cut the roll media.
NOTE
The Cutter Blade needs to be placed at its home position correctly after the above operation.
After cutting the media rotating the Cutter Handle, place the green part inside of the notch.
If red part is seen in the notch, the Cutter Blade is not correctly placed to its home position.
And at this time take care for the following points.
•
Do not rotate the Cutter Handle counter-clockwise. It will damage the Cutter Blade.
•
Do not rotate the Cutter Handle more than once. If it is rotated many times, very small
paper portion will be left in the cutter unit. This will cause the error.
Correct (Green)
Incorrect (Red)
Cutter Handle