Home » Konica Minolta Manuals » Printers » Konica Minolta KIP 9900 » Manual Viewer

Konica Minolta KIP 9900 User Guide - Page 75

User Mode 8 (Choice of Standard / Special Print Mode [Plain paper]), User Modes 8

View all Konica Minolta KIP 9900 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

2. 8. 8 User Mode 8 (Choice of Standard / Special Print Mode [Plain paper]) [Function] The operation mode of KIP 9900 can be set to either Standard Print Mode or Special Print Mode according to the situation. This setting become effective when printed with a plain paper. Reference Many printer parameters of KIP 9900 are adjusted most properly in the factory so that the KIP 9900 can produce a satisfactory print quality when printing is performed within what the machine specification declares. These parameters adjusted in factory will be applied when the operation mode is set to Standard Mode. Usually the Standard Print Mode is enough for getting a satisfactory print result. If some usage condition is not within what the machine specification declares, for example some unsupported media is used or the temperature/humidity range is not within specified range, KIP 9900 may not be able to produce a satisfactory print result. In such case the service personnel customize some printer parameters most properly so that a satisfactory print result can be obtained even in such special case, and save such parameters as Special Print Mode. (User can not change such parameters.) What the user has to do in the User Mode 8 is to switch between Standard Print Mode and Special Print Mode according to the situation. Please consult the service personnel as he knows in what case the operation mode should be set to Special Print Mode. NOTE User Modes 8, 9 and A are the selection mode of Standard Print Mode and Special Print Mode. Each of them has its own target media type to which the selected operation mode is applied. User Mode 8 : Selection of operation mode for plain paper User Mode 9 : Selection of operation mode for tracing paper User Mode A : Selection of operation mode for film 2-53 Chapter 2 Basic Operations

Section	Page
KIP 9900 Hardware Operation Guide	4
WARNING	5
CAUTION	6
POWER CORD INSTRUCTION	7
Chapter 1 Before Use	8
1. 1 Installation Requirements	9
1. 2 Originals Prohibited from Duplication	10
1. 3 Features	11
1. 4 Specifications	12
1. 5 Appearance	14
1.5.1 Front view	14
1.5.2 Right side view	15
1.5.3 Rear view	16
1.5.4 Operation Panel	19
1.5.5 Media Indicators	20
1.5.6 “in use” Indicators	21
Chapter 2 Basic Operations	23
2. 1 Turning on the KIP 9900	24
2. 2 Turning off the KIP 9900	26
2. 3 Setting the Roll Media into Roll Deck	27
2. 3. 1 Roll 1 / 2 / 3	28
2. 3. 2 Roll 4	35
2. 4 Setting Cut Sheet Media to Bypass Feeder	38
2. 4. 1 Multi-feeding of cut sheet media	39
2. 4. 2 Singular feeding of cut sheet media	40
2. 5 Replacing the Toner Cartridge	42
2. 6 Dehumidifying the Roll Media	46
2. 7 Initial Cut (Straighten the leading edge of roll media)	48
2. 8 User Mode	50
2. 8. 1 User Mode 1 (Test Print)	52
2. 8. 2 User Mode 2 (Calendar setting)	54
2. 8. 3 User Mode 3 (Warm Sleep Mode ON / OFF & timer setting)	59
2. 8. 4 User Mode 4 (Cold Sleep Mode timer setting)	63
2. 8. 5 User Mode 5 (Automatic paper cut at power ON)	66
2. 8. 6 User Mode 6 (Transfer Support LED ON/OFF [Film])	69
2. 8. 7 User Mode 7 (Alarm ON / OFF)	72
2. 8. 8 User Mode 8 (Choice of Standard / Special Print Mode [Plain paper])	75
2. 8. 9 User Mode 9 (Choice of Standard / Special Print Mode [Tracing paper])	79
2. 8.10 User Mode A (Choice of Standard / Special Print Mode [Film])	82
2. 8.11 User Mode B (Selection of Image Enhancement Mode)	85
2. 8.12 User Mode D (Cancel E-26 error)	88
2. 8.13 User Mode E (Cancel E-28 error)	91
2. 8.14 User Mode A1 (Auto Initial Cut: Media)	94
2. 8.15 User Mode A2 (Auto Initial Cut: Length)	94
2. 8.16 User Mode P1 to P4 (Special Width Selection in Metric Mode)	95
2. 8.17 User Mode F0 to Fb (Fold settings)	98
Chapter 3 Error Correction and Maintenance	105
3. 1 Media Mis-feed Errors (J-**)	106
3. 1. 1 Mis-feed in Roll Decks (J-01, J-02, J-03 & J-04)	107
3. 1. 2 Mis-feed in the Bypass Feeder (J-05)	110
3. 1. 3 Mis-feed between Cutter and Drum (J-11)	111
3. 1. 4 Mis-feed on Internal Transportation Unit (J-12) and Fuser Entrance (J-13)	115
3. 1. 5 Mis-feed in Fuser Unit (J-14)	122
3. 1. 6 Mis-feed in Folder (J-21)	129
3. 1. 7 Mis-feed in Auto Stacker (J-22)	129
3. 2 Open Errors (U-**)	130
3. 2. 1 Top Drawer Open (U-01)	130
3. 2. 2 Middle Drawer Open (U-02)	130
3. 2. 3 Bottom Drawer Open (U-03)	131
3. 2. 4 Internal Transportation Unit Open (U-04)	131
3. 2. 5 Toner Cover Open (U-06)	131
3. 2. 6 Bypass Feeder Open (U-11)	132
3. 2. 7 Right Side Door Open (U-12)	132
3. 2. 8 Top Rear Cover Open (U-13)	132
3. 2. 9 Exit Cover Open (U-14)	133
3. 2.10 Folder Door Open (U-21)	133
3. 3 Toner Cartridge Error (C-01)	134
3. 4 Service Call Errors (E-**)	135
3. 5 Interruption of Print by Temperature Control	136
3. 6 Maintenance	137
3. 6. 1 Cleaning the Image Corona	137

Match case Limit results 1 per page

Chapter 2

Basic Operations

2-53

2. 8. 8

User Mode 8

(Choice of Standard / Special Print Mode

[Plain paper])

[Function]

The operation mode of KIP 9900 can be set to either Standard Print Mode or Special Print Mode

according to the situation.

This setting become effective when printed with a plain paper.

Many printer parameters of KIP 9900 are adjusted most properly in the factory so that the KIP

9900 can produce a satisfactory print quality when printing is performed within what the

machine specification declares. These parameters adjusted in factory will be applied when the

operation mode is set to Standard Mode. Usually the Standard Print Mode is enough for

getting a satisfactory print result.

If some usage condition is not within what the machine specification declares, for example

some unsupported media is used or the temperature/humidity range is not within specified

range, KIP 9900 may not be able to produce a satisfactory print result. In such case the

service personnel customize some printer parameters most properly so that a satisfactory print

result can be obtained even in such special case, and save such parameters as Special Print

Mode. (User can not change such parameters.)

What the user has to do in the User Mode 8 is to switch between Standard Print Mode and

Special Print Mode according to the situation. Please consult the service personnel as he

knows in what case the operation mode should be set to Special Print Mode.

Reference

NOTE

User Modes 8, 9 and A are the selection mode of Standard Print Mode and Special Print

Mode. Each of them has its own target media type to which the selected operation mode is

applied.

User Mode 8 : Selection of operation mode for plain paper

User Mode 9 : Selection of operation mode for tracing paper

User Mode A : Selection of operation mode for film