Home » Konica Minolta Manuals » Printers » Konica Minolta KIP 9900 » Manual Viewer

Konica Minolta KIP 9900 User Guide - Page 42

Replacing the Toner Cartridge

View all Konica Minolta KIP 9900 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

2. 5 Replacing the Toner Cartridge The Toner Empty Indicator on the Operation Panel flashes when the toner is "near empty", and it lights when the toner is completely empty. Replace the Toner Cartridge when it lights. Toner Empty Indicator PAPER DECK MF 1234 D1 WIRE CLEAN EXP- CLEAN SELECT CUT D2 D3 EXIT PF D4 COPY DENSITY MENU ENTER ONLINE Reference (1) Even if the KIP 9900 is on printing, it is possible to replace the Toner Cartridge without interrupting printing. (2) It is still possible to make some more printing when the Toner Empty Indicator is flashing, but the toner will be soon emptied completely and the KIP 9900 will no more be able to continue printing. For avoiding machine down, prepare a new Toner Cartridge before the Toner Empty Indicator starts flashing. NOTE (1) The KIP 9900 Toner Cartridge is embedded with the IC Tag for an exclusive use on KIP 9900. Even if the Toner Cartridge for other models is installed, the KIP 9900 does not operate with indicating an error code "C-01". (2) Once the Toner Cartridge become empty with the toner, the KIP 9900 recognizes its IC Tag information. The same Toner Cartridge can no more be installed onto the KIP 9900 after that. The KIP 9900 does not operate with indicating an error code "C-01" if once emptied Toner Cartridge is installed. 1. Open the Toner Cover on the right face. Toner Cover 2-20 Chapter 2 Basic Operations

Section	Page
KIP 9900 Hardware Operation Guide	4
WARNING	5
CAUTION	6
POWER CORD INSTRUCTION	7
Chapter 1 Before Use	8
1. 1 Installation Requirements	9
1. 2 Originals Prohibited from Duplication	10
1. 3 Features	11
1. 4 Specifications	12
1. 5 Appearance	14
1.5.1 Front view	14
1.5.2 Right side view	15
1.5.3 Rear view	16
1.5.4 Operation Panel	19
1.5.5 Media Indicators	20
1.5.6 “in use” Indicators	21
Chapter 2 Basic Operations	23
2. 1 Turning on the KIP 9900	24
2. 2 Turning off the KIP 9900	26
2. 3 Setting the Roll Media into Roll Deck	27
2. 3. 1 Roll 1 / 2 / 3	28
2. 3. 2 Roll 4	35
2. 4 Setting Cut Sheet Media to Bypass Feeder	38
2. 4. 1 Multi-feeding of cut sheet media	39
2. 4. 2 Singular feeding of cut sheet media	40
2. 5 Replacing the Toner Cartridge	42
2. 6 Dehumidifying the Roll Media	46
2. 7 Initial Cut (Straighten the leading edge of roll media)	48
2. 8 User Mode	50
2. 8. 1 User Mode 1 (Test Print)	52
2. 8. 2 User Mode 2 (Calendar setting)	54
2. 8. 3 User Mode 3 (Warm Sleep Mode ON / OFF & timer setting)	59
2. 8. 4 User Mode 4 (Cold Sleep Mode timer setting)	63
2. 8. 5 User Mode 5 (Automatic paper cut at power ON)	66
2. 8. 6 User Mode 6 (Transfer Support LED ON/OFF [Film])	69
2. 8. 7 User Mode 7 (Alarm ON / OFF)	72
2. 8. 8 User Mode 8 (Choice of Standard / Special Print Mode [Plain paper])	75
2. 8. 9 User Mode 9 (Choice of Standard / Special Print Mode [Tracing paper])	79
2. 8.10 User Mode A (Choice of Standard / Special Print Mode [Film])	82
2. 8.11 User Mode B (Selection of Image Enhancement Mode)	85
2. 8.12 User Mode D (Cancel E-26 error)	88
2. 8.13 User Mode E (Cancel E-28 error)	91
2. 8.14 User Mode A1 (Auto Initial Cut: Media)	94
2. 8.15 User Mode A2 (Auto Initial Cut: Length)	94
2. 8.16 User Mode P1 to P4 (Special Width Selection in Metric Mode)	95
2. 8.17 User Mode F0 to Fb (Fold settings)	98
Chapter 3 Error Correction and Maintenance	105
3. 1 Media Mis-feed Errors (J-**)	106
3. 1. 1 Mis-feed in Roll Decks (J-01, J-02, J-03 & J-04)	107
3. 1. 2 Mis-feed in the Bypass Feeder (J-05)	110
3. 1. 3 Mis-feed between Cutter and Drum (J-11)	111
3. 1. 4 Mis-feed on Internal Transportation Unit (J-12) and Fuser Entrance (J-13)	115
3. 1. 5 Mis-feed in Fuser Unit (J-14)	122
3. 1. 6 Mis-feed in Folder (J-21)	129
3. 1. 7 Mis-feed in Auto Stacker (J-22)	129
3. 2 Open Errors (U-**)	130
3. 2. 1 Top Drawer Open (U-01)	130
3. 2. 2 Middle Drawer Open (U-02)	130
3. 2. 3 Bottom Drawer Open (U-03)	131
3. 2. 4 Internal Transportation Unit Open (U-04)	131
3. 2. 5 Toner Cover Open (U-06)	131
3. 2. 6 Bypass Feeder Open (U-11)	132
3. 2. 7 Right Side Door Open (U-12)	132
3. 2. 8 Top Rear Cover Open (U-13)	132
3. 2. 9 Exit Cover Open (U-14)	133
3. 2.10 Folder Door Open (U-21)	133
3. 3 Toner Cartridge Error (C-01)	134
3. 4 Service Call Errors (E-**)	135
3. 5 Interruption of Print by Temperature Control	136
3. 6 Maintenance	137
3. 6. 1 Cleaning the Image Corona	137

Match case Limit results 1 per page

Chapter 2

Basic Operations

2-20

2. 5

Replacing the Toner Cartridge

The Toner Empty Indicator on the Operation Panel flashes when the toner is “near empty”, and it

lights when the toner is completely empty. Replace the Toner Cartridge when it lights.

Toner Empty Indicator

Open the Toner Cover on the right face.

COPY DENSITY

ENTER

ONLINE

EXIT

PAPER DECK

SELECT

CUT

WIRE CLEAN

EXP- CLEAN

(1) Even if the KIP 9900 is on printing, it is possible to replace the Toner Cartridge without

interrupting printing.

(2) It is still possible to make some more printing when the Toner Empty Indicator is flashing,

but the toner will be soon emptied completely and the KIP 9900 will no more be able to

continue printing. For avoiding machine down, prepare a new Toner Cartridge before the

Toner Empty Indicator starts flashing.

Reference

NOTE

(1) The KIP 9900 Toner Cartridge is embedded with the IC Tag for an exclusive use on KIP

9900. Even if the Toner Cartridge for other models is installed, the KIP 9900 does not

operate with indicating an error code “C-01”.

(2) Once the Toner Cartridge become empty with the toner, the KIP 9900 recognizes its IC Tag

information. The same Toner Cartridge can no more be installed onto the KIP 9900 after

that. The KIP 9900 does not operate with indicating an error code “C-01” if once emptied

Toner Cartridge is installed.

Toner Cover